• SavvyWolf@pawb.social
    link
    fedilink
    English
    arrow-up
    0
    ·
    7 months ago

    Cables.

    Like, just buy a bunch of USB-C cables; they’re cheap. Maybe some HDMI and audio ones. Maybe splurge for the braided ones if you want to be fancy. It saves you from the problem of only having one that works that you have to keep juggling around, or not having one on hand when you need it. Different lengths and colours as well, so you don’t have super long ones going all over the place, and can distinguish them at a glance.

  • mipadaitu@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    7 months ago

    Almost any repair tools, gardening, or anything NEEDED to DIY. You can do a lot of personal projects with very little money.

    That being said, it’s very easy to fall into a trap of going beyond what is needed into a full, fancy workshop, with all the shiny new equipment. If that’s what you’re goal is, that’s fine. If you’re doing it to save money, there’s a lot of ways to just get the bare minimum, and be extremely effective. Especially if you can get used, or even non-functional equipment and fix it up yourself.

    • ColeSloth@discuss.tchncs.de
      link
      fedilink
      arrow-up
      0
      ·
      7 months ago

      They always sale descent mechanics tool sets for like $100 on black Friday and sometimes other times from home depot or Lowes.

      That and youtube will pay for itself the first time you need to do an easy diy job on your car.

      Why pay a shop $300 dollars to replace a thermostat when you can do it for a $15 part and $20 of radiator fluid yourself?

      $30 set of jack stands and you’ll never have to pay a shop $400 again to replace your front brakes. Good brake pads are $50.

      Spark plugs need replaced? $200 at a shop for a 4 cylinder car, or do it yourself in under an hour for $35 worth of spark plugs.

      There’s tons of vehicle stuff that’s not very hard to do that will save you tons of money with a set of tools and the ability to learn. I drive 15+ year old vehicles and have only taken one to a shop twice in the past 20 years. I do stuff a lot more advanced than your average person probably wants to try to do themselves, but I like working on my own stuff. But most of what I do is easy enough for most people to do without being too difficult.

    • invertedspear@lemm.ee
      link
      fedilink
      arrow-up
      0
      ·
      7 months ago

      Buy your first whatsit as cheap as possible, if you break it, replace it with another cheap one, if you break that one too, go buy a nice one.

      • Admiral Patrick@dubvee.org
        link
        fedilink
        English
        arrow-up
        0
        ·
        edit-2
        7 months ago

        So much this.

        If I know I only need a tool once or twice, I always buy Harbor-Freight (discount power tools if you’re not familiar with them). I’ve always been able to complete the job with it, and anything beyond that is just bonus IMO (versus renting a better tool for the job at equal or greater cost).

        Normally, though, they last a lot longer than that. I bought a HF drill in like 2004 and it finally died last year and was used pretty heavily throughout its life. Pretty sure I got my $18 worth.

      • Monument@lemmy.sdf.org
        link
        fedilink
        English
        arrow-up
        0
        ·
        edit-2
        7 months ago

        I had to talk myself out of looking at small backhoes or tractors with a backhoe attachment today…. because I’m thinking about installing a single French drain. My “land” is 50’x100’, in a city.

        Going big instead of being reasonable is a very real affliction that affects way more people than you realize.

      • mipadaitu@lemmy.world
        link
        fedilink
        English
        arrow-up
        0
        ·
        7 months ago

        It’s a tough balancing act. You don’t want to dive all in and buy the nicest, fanciest, most expensive equipment right out. But also, if you buy too cheap, or too limiting, you’re going to get discouraged.

        Used is a really good balance between the two. Plan it out, figure out what you need, and meet someone locally to pick up their old stuff. Usually, if they’re selling their starter equipment to upgrade, you can even chat with them about the hobby, and get some real good local advice. Maybe even and in with the local community.

        It really is a win-win.

        • snooggums@midwest.social
          link
          fedilink
          English
          arrow-up
          0
          ·
          edit-2
          7 months ago

          And when it doubt, if it has a motor or needs to hold a heavy object over you then go for something in the middle range of cost unless you will be using is professionally or as frequently as a professional. The cheap stuff can be dangerous, and are generally not that much cheaper than a decent home use tool.

          Estate sales and garage sales are other places to pick up used tools if you have a rough idea of what to look for like the finishing touches that used to be put on older higher quality tools like smoothing mold lines. Old mismatched tools from formerly reliable brands like Craftsman can be had for cheap!

  • Admiral Patrick@dubvee.org
    link
    fedilink
    English
    arrow-up
    0
    ·
    7 months ago

    I can think of a few that have served me well:

    • A good laser printer: $100 plus a few reams of paper have covered my printing needs for over a decade (and going)
    • Wool socks for the winter. Makes dropping the thermostat a degree or two much less unpleasant
    • A good, 100W USB-C PD charger. I’ve got a few, and they’ll charge/power pretty much any of my devices (including laptop).
    • Naich@lemmings.world
      link
      fedilink
      arrow-up
      0
      ·
      7 months ago

      100% laser printer. My Brother laser paid for itself the first time I bought a set of cheap toner for it. I don’t understand why people buy/rent inkjet ripoffs.

      • anon6789@lemmy.world
        link
        fedilink
        arrow-up
        0
        ·
        7 months ago

        I spotted one on the curb and thought it was an Epson at first glance. Took another look and saw it was a BW Brother laser the internet nerds are always going on about. I took it inside and dried the water off from the rain that just started, and was ready to take it back out to the curb where I found it whenever I discovered why it was put outside.

        That thing is rock solid.

        My girlfriend insists on having her Canon inkjet for color, and that thing bugs out at least once a month. Her mom’s HP has been a nightmare for me to deal with over the time she’s had it. This trash Brother has been the best home printer and scanner I’ve had in my near 30 years of computing. It’s still going on the toner it came with, not that I print much. Any wifi issues have not been related to the printer. It prints and scans great. From what I understand, third party toner should be no issue when the time comes as there’s no chip.

        The hype is real on these Brothers.

        • pearsaltchocolatebar@discuss.online
          link
          fedilink
          arrow-up
          0
          ·
          7 months ago

          I still have my Brother laser printer from like 2006 and that bad boy is still running strong, although the nic recently crapped out. I just need to get around to hooking it up to a raspberry pi to get networking back.

          • anon6789@lemmy.world
            link
            fedilink
            arrow-up
            0
            ·
            3 months ago

            I’ve never had an issue with it. Wifi works, scanner works, I think it’s even still on factory toner, print quality is good.

            They must have upgraded to something color or faster, as I can’t think why someone would have tossed it.

            I don’t print much, so I probably wouldn’t have a home printer otherwise since most of the ones I’ve had were more trouble than they were worth. But the Brother kicks butt for me.

    • invertedspear@lemm.ee
      link
      fedilink
      arrow-up
      0
      ·
      7 months ago

      I just had to replace my 15 y/o Samsung laser printer because I couldn’t find toner carts for it anymore. Nor would it work with anything but windows. Last time I found toner about 3 years ago I bought the last two the website had and they finally ran dry and no matter how much I shook them gaps were present. Laser printing is the best.

    • garbagebagel@lemmy.world
      link
      fedilink
      arrow-up
      0
      ·
      7 months ago

      Bidet is one of the best responses I’ve seen here. I’ve had one for ages for environmental and cost saving reasons, and now I literally can’t stand shitting in places without one.

      Big Toilet Paper and American culture have been lying to us for all these years.

  • mommykink@lemmy.world
    link
    fedilink
    arrow-up
    0
    ·
    edit-2
    7 months ago

    A rice cooker. YMMV but I’ve probably cut 80% of my food spending since I had a way to cook rice reliable and easily.

    • HamsterRage@lemmy.ca
      link
      fedilink
      arrow-up
      0
      ·
      7 months ago

      An small InstantPot does the trick just as well, and you can use it for other stuff as well.

    • Bob@feddit.nl
      link
      fedilink
      arrow-up
      0
      ·
      7 months ago

      Could you elaborate? It sounds like you used to fuck the rice up most of the time and have to throw it?

    • Semi-Hemi-Demigod@kbin.social
      link
      fedilink
      arrow-up
      0
      ·
      7 months ago

      I’ve never found a rice cooker to be necessary. Just cover the rice with about an inch of water - i.e. the finger trick - bring it to a boil and then cover it and turn it off. The latent heat will cook it perfectly in about 20 minutes without any other thought.

      • tunetardis@lemmy.ca
        link
        fedilink
        arrow-up
        0
        ·
        7 months ago

        It’s good to have a pot with a heavy, well-sealing lid in this case since rice cooks better under a bit of pressure.

      • DominusOfMegadeus@sh.itjust.works
        link
        fedilink
        arrow-up
        0
        ·
        edit-2
        7 months ago

        I don’t get it either, and I have tried both. My results in the Zojirushi are middling, and well below what I achieve on my stove. If I need a longer-cooking variety (like brown or black rice) done more quickly, then I use the Rice button on my Instant Pot. The Zojirushi takes minimum 60 minutes on any variety and the results are not as good as what I can do on my stove in 20 minutes. (Plus the Zojirushi has no timer, no status indicator, and no power button. To turn it on you plug it in.)

        • Ottomateeverything@lemmy.world
          link
          fedilink
          arrow-up
          0
          ·
          7 months ago

          (Plus the Zojirushi has no timer, no status indicator, and no power button. To turn it on you plug it in.)

          Every zojirushi I’ve ever seen has more buttons and settings than most microwaves. Did you buy the cheapest one they sold?

      • Breezy@lemmy.world
        link
        fedilink
        arrow-up
        0
        ·
        7 months ago

        That sounds nice and easy, but i fucked up my rice about a third of the time and it really deterred me from making much. I got a rice cooker 4 years ago, ooooh boy now i make rice at least twice a week. As simple as making rice seems, untill you get it, it just isnt that easy. Plus rice cookers are like 25 dollars. Definitely the most used extra appliance ive ever had.

    • garbagebagel@lemmy.world
      link
      fedilink
      arrow-up
      0
      ·
      7 months ago

      I’m actually the opposite. We relied heavily on our $25 rice cooker (and it’s still nice sometimes) but recently I discovered that stove cooked rice with like actual ingredients in it isn’t as difficult as I thought it would be. Total gamechanger and even though I love my plain white rice, it can be really nice to mix it up and do like a Greek or Mexican style rice.

  • BlueLineBae@midwest.social
    link
    fedilink
    English
    arrow-up
    0
    ·
    7 months ago

    I have recently needed to travel for work and my duffel bag was a pain in the butt to carry around the airport. All the rolling bags I saw for purchase didn’t seem well made and were pretty expensive while somehow not utilizing all of the available overhead space. Even well known brands like swiss gear seems to have critical break points on their luggage. The last trip I made, I noticed that all of the flight crew used the same brand of luggage that looked very well made and was reinforced in all the right areas. So I looked it up and found that their non-commercial line was just as shitty as everything else I was seeing, but their flight crew line was top tier… But only flight crew could buy it. So I found a website that would sell it to me! $240 for a suitcase that looks like it will last my lifetime and fits the exact dimensions of the overhead space saving me $40 per trip to not check the bag (my company doesn’t cover checking bags). Return on “investment” is 6 flights or 3 round trips. The brand is Travelpro for anyone wondering. And the site I purchased from is mypilotstore.com. They even sell spare parts such as wheels/bearings or leather handles. Super happy with my purchase!!

    • bookcrawler@lemmy.world
      cake
      link
      fedilink
      arrow-up
      0
      ·
      7 months ago

      Really wanted to get some of the Travel pro brand. Sadly, despite seeing it all the time with crew, it doesn’t meet our size requirements as passengers.

      • BlueLineBae@midwest.social
        link
        fedilink
        English
        arrow-up
        0
        ·
        7 months ago

        They have different sizes in the latest lineup. Including 3 smaller sizes that fit in the overhead. I got one that’s 22x14x9 which is perfect for most domestic flights in the US. But they also have smaller sizes and an international size.

        • bookcrawler@lemmy.world
          cake
          link
          fedilink
          arrow-up
          0
          ·
          edit-2
          7 months ago

          I’ll have to see if they have an international site. Checked today and their smallest option is still a bit too big. Might get one anyway as it seems all the luggage recommended for the airline are all a bit too big in at least one direction. We have one of the stricter airlines for baggage size.

          Thank you though!

  • plactagonic@sopuli.xyz
    link
    fedilink
    arrow-up
    0
    ·
    7 months ago

    My wallet cried a little when I bought new bike, then I calculated the cost of alternative (car, public transport) and was surprised that even nicer bike is cheaper.

    If I count only operating cost of car it will pay off in about 1 - 1.5 years. Public transport is at about 2 years.

    Yes I know that I have some infrastructure, and other things that make it possible for me to use it everyday as car.

    Also I stay fit and healthy when I don’t sit in a car - so this is another value that can’t be easily put in monetary perspective.

    • dohpaz42@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      7 months ago

      If you still own a car, and you don’t drive it to work, call your insurance and have them reclassify your car as “personal use”. It’ll save you on your insurance costs.

      • tunetardis@lemmy.ca
        link
        fedilink
        arrow-up
        0
        ·
        7 months ago

        That’s interesting. I will follow up on this. I do occasionally drive to work when the weather or road conditions are atrocious. More so in the winter months. But it’s a sporadic thing now and the car is no longer my main mode of transport.

    • Tujio@lemmy.world
      link
      fedilink
      arrow-up
      0
      ·
      7 months ago

      I did the same math when I bought my bike. How many times do I have to ride it to work to break even on this purchase? And as soon as I hit that threshold I never touched the thing again. Turns out I hate riding a bike.

      • tunetardis@lemmy.ca
        link
        fedilink
        arrow-up
        0
        ·
        7 months ago

        It doesn’t have to be an either/or proposition. You can restrict your riding to only beautiful days when you’re feeling good and it’ll still make a difference.

        • Tujio@lemmy.world
          link
          fedilink
          arrow-up
          0
          ·
          7 months ago

          That’s actually what I tried to do. But I live in Seattle. 9ish months of cold wet days means I’m in terrible shape when the beautiful summer comes around, then by the time I’m back in shape, it’s time to hibernate again.

      • plactagonic@sopuli.xyz
        link
        fedilink
        arrow-up
        0
        ·
        7 months ago

        What was your issue with bikes? When I got used to it, it is no brainer to pick a bike and get to work.

        • Tujio@lemmy.world
          link
          fedilink
          arrow-up
          0
          ·
          7 months ago

          Basically comes down to the fact that I don’t enjoy it. Every time I’m on a bike I just think “I could be in a car. I could be sitting in a comfy seat listening to music, going way faster than this, using zero effort.” I like diving, I don’t like biking.

          Plus, the last thing I want to do after a 12-hour shift at a physical job is to bike several miles uphill to get home.

          • tunetardis@lemmy.ca
            link
            fedilink
            arrow-up
            0
            ·
            7 months ago

            Plus, the last thing I want to do after a 12-hour shift at a physical job is to bike several miles uphill to get home.

            That’s a fair point. My job is sedentary and cycling is my primary form of exercise. (That said, I do have an ebike so the workout is not mandatory. Don’t tell my dietician that…)

            I guess what got me into the cycling option was having a good hard look at the map. I work in an industrial park with a railway running next to it, but that railway was decommissioned years ago, and it turns out that it had been converted into a public trail. Much of the time I was driving to work, I was not even aware of this. But I tried out the trail. Not only does it knock about a mile off the street route, but it replaces slow-rolling trucks with tree tunnels and, because it had been a railway, the grades are gentle and bike-friendly.

            I no doubt lucked out there but what I’m trying to say is it’s worth checking where bikes can go and cars cannot, as it can be a better experience to take those routes if they exist?

  • snooggums@midwest.social
    link
    fedilink
    English
    arrow-up
    0
    ·
    edit-2
    7 months ago

    Decent stainless steel ‘silverware’ that doesn’t easily bend will last a lifetime isn’t very expensive for a one time purchase, and can be really cheap to pick up used if you aren’t too picky.