You buy it anyway, and it’s a great purchase. Very happy. Dog eats it a few days later and the product is discontinued. Or Is it just me?
If you really are looking for a hoodie: 1620.
Prices are high, they’re very proud of their products. Their work pants aren’t worth it, garage. Both pairs I bought don’t come close to my Wrangler for durability.
However, their hoodie is pretty dope. It’s long, and the hood is huge. A proper functioning hood. It’s thick & warm. Only downside is it’s long, and I’m 6’1", it falls below my ass. The waist is also wide, or my waist is just more narrow than the average tradesman they’re targeting.Sounds like you bought a size too large? If its too long and wide
“You click on a reddit link but their certificate expired and the page isn’t opening”
Everyone replies with ‘thanks’, ‘nailed it’. ‘Holy shit that’s perfect’
To a comment that’s [deleted]
Holy shit thank you for this, i never even knew.
Every FOSS project I’ve ever looked into lol
When I started fishing as a hobby, I couldn’t believe that it was the only hobby I’ve ever taken up that pretty much had unanimous recommendations for beginners. Everyone seemed to suggest the Ugly Stik GX2 on every website or forum. And there were no threads about how I should buy a more expensive rod/reel, other than a few that mentioned that I might want to upgrade the reel on the GX2 after a year or so.
Even the salesperson at the Bass Pro Shops store recommended the GX2 even though I could have afforded a bit more.
It was a completely new experience for me. I am used to having to spend at least $300-400 on initial investments for new hobbies. Fishing was only $120 for everything!
My hobby (speedcubing) is like that as well. If you ask any semi competent speedcuber you will hear something along the lines of “Get the newest RS3M (9$) and maybe some lube (4$)”. I love it for that.
(Of course it s all a foot-in-the-door scam to get you hooked so you buy other events but shhh)
Gerber Legend 800 Multitool
The one I got from a PX the year after it was released is epic. Have carried it for 23 years. It has seen everything and outside of scraping the knife sharpish again, has never been maintained. I misplaced it for a bit (under friends driver’s seat for about a year) and couldn’t find a replacement “upgrade”. Did the Leatherman wave2 for a bit. Couldn’t take it, hit up eBay, got 3 more Gerber L800s (later release, still in boxes)…so bad. They just felt cheaper. When we stumbled upon my old Gerber, I kept the new ones for parts. Replace my knife with a new one…it already has rust dots on it. My old one after decades of abuse and being sharpened to half it’s starting width, doesn’t have a spot of rust on it.
ANYWAY…yeah…what OP said.
Yeah, Gerber fell the fuck off. They became just sloppy.
I feel Leatherman has stayed the course.
For something like a hoodie, I recommend you go to a thrift store. Anything you find there will be durable and quality enough to survive, and you can feel it or try it on. It’s very easy to find high quality stuff while thrifting. 8 dollars for what might cost 80 new.
Try to focus on non-synthetic fibers or semi synthetic. Plastics in clothing are bad for the environment.
I snagged the world’s comfiest leather jacket for $8 at a local thrift shop. All it needed was some stitching in a couple pockets, but it’s bloody perfect otherwise. Eight friggen bucks.
Plastic in clothes is bad for you, not just the environment
Microplastics apparently do infiltrate through the skin
We have… done bad things with our world.
I ran into this when I was thinking about buying some Doc Martens recently. I know there have been other examples, that’s just the most recent I can remember.
I spent 3 hours reading Amazon reviews for shoes just trying to find ONE fucking pair that didn’t have “falls apart in 3-6 months” as the most common review…
The state of everything is just absurd.
It should go without saying that if the brand you’re considering is called “Lahuekty” or “Mpanobeb” or something stupid like that you’re taking a huge risk. Amazon’s ‘brands’ are a joke.
Part of that is just selection bias. Very few people would post Amazon reviews for their shoes unprompted. But if something unexpected happens, like if they have a defective pair, they’re quite a bit more likely to go back and write something.
Shoes have too much of a usage difference to go off of Amazon reviews. You don’t know their lifestyle. For anyone that runs a marathon or similar exercise to have shoes that last over 3 months would be a miracle. Any typical big brands like adidas, Nike, etc lasts me many years if I only wear them lightly, like if I take the car. But if I exercise outside in them, they’re not gonna last half a year. It’s just usage dependent.
Occasionally you might get a bad batch and glue comes off or stitching rips. That’s inevitable bad luck. Though you can just get gorilla glue and glue it back yourself.
Dress shoes is a different ball game. Get stitched build/welted, not glued on. That’s usually a safe choice though expensive. These can be repaired and resoled, so you could wear them for 10+ yrs. Though getting bored of them might be an issue.
Light weight shoes are also obviously going to not last. Like hey dude shoes. They’re literally a single sheet of cloth. Easy to wash, but not going to last.
Also stop trying to buy shoes from Amazon. Go wear shit and try them on.
Sooooo depends on what you’re using them for. Very few shoes will hold up to retail work, for instance. So 3-6 months for one reviewer without context could be 2 years for you.
We’ve always had to pay for quality, buying crap on Amazon is always going to be a tossup. There’s plenty of stores out there where you can buy good stuff, you just have to be willing to pay more than slave wages for it.
It’s tough out there, but there’s plenty of quality stuff if you look in the right place.
Yeah, the only shoes I’ve ever had falling apart (or more accurately, worn until there were holes in one of them) were worn for years before that happened.
I’ve also never spent under $100 on shoes.
And I don’t think it’s smart to buy shoes you haven’t tried on. There’s variation in foot shapes, some shoes just aren’t designed for your foot and need to be “broken in”. I thought all shoes needed to be broken in until one time I got lucky and the second pair I tried fit perfectly right away. Ever since then, I’ll keep trying shoes until I find ones that don’t need to be broken in.
One exception was when I forgot about that when my cousin saw a sale on good sandals and had him pick me up a pair. Was reminded the first time I wore them. I spent a day at an amusement park and my feet were killing me by the end of it. Figured it was because I hadn’t been standing much leading up to that. But then, a few years later I wore the same sandals (now broken in) in a similar situation and my feet didn’t feel nearly as bad.
So try on shoes until you feel ones that feel good right away and your feet will thank you. Spend money up front for quality and your wallet will thank you when those shoes last longer than that amount of cheap ones do.
Also take care of them. If they are tie up shoes, untie them to remove them. If they are difficult to get the heel in, get a shoe horn. If you’re often walking through puddles and/or mud, wear boots. Always wear socks unless your footwear can breathe well.
I’ve never put shoes through the washer, not sure how that would affect the longevity, though it likely depends on the materials.
Good shoes will last longer than the laces, too, so just replace the laces when they get worn down. A new lace colour can also refresh the look.
Like new xiaomi phones right? At least the new Pocos are decent.
This is where guitars are right now.
Both Fender and Gibson are now owned by venture capitalists. Their quality of everything, from strings to picks to guitars, has plummeted across every brand in the last five years. It’s sad really.
You do on Reddit and people talk about the models and which one is great for this, or why they prefer it for that, but then you find some deeper dives into more recent spaces and people who know what they are talking about have moved away entirely from both brands.
I saw a headline on some guitar magazine “These are the most over priced guitars currently”. Says a lot and it’s true.
There’s not much point in throwing money at a brand name anymore. Quality control is long gone and they all come straight out of a factory anyway. It’s alright though, because factory quality is decent, and with a little know-how you can easily make them play good.
My best guitar is a $100 kit-build. Acknowledging that I’d need to do a full setup on any guitar I figured I might as well paint and assemble it myself, because I’m not going to pay several hundreds just for a paint job and a logo.
Did you like building your own? I have a used PRS SE 24, which I got for a steal due to paint scuffs, but thought about building my own.
Yes absolutely, I enjoyed it and might do it again sometime with a different kit.
I do have a lot of tools already so that wasn’t costly, only good practice, but it did take somewhat longer than I expected.
I wouldn’t attempt to make the neck and fretboard from scratch, so a kit with a good neck is a good starting point.
Did you find any useful guides online or on YouTube for getting started? I have a decent set of tools, but this would be a new endeavor for me.
Well aware this would be a “me” guitar and not something that would have much of a value to anyone else. Some people seem to think they are building their own K-Line guitar.
It was all pretty straight forward. The kit was made to be assembled with a bolt on neck all predrilled, so it was basically just shaping the body and headstock and then paint and varnish.
I did look up some painting techniques, but I really just wanted to stain the wood, so I did that with a brush and then 2 coats of varnish. I had to sand the wood first to make it more open for staining instead of paint. If you want to paint or spray paint you should probably keep or make a base coat to avoid the wood absorbing the paint.
It was a cheap stratocaster-like kit, so I wasn’t too concerned with making mistakes, but I’ll admit that putting the saw into a guitar was a little daunting at first.
I used a multi-cutter for most of it to make very precise cuts. And lots and lots of sandpaper by hand with different grit sizes.
It only took a few evenings to do, so it is not difficult at all, but I guess it depends on how much you want to customize it.
Do you know the brand? Sounds like my next winter project.
I want to make one with normal pickups - Out1 and add a piezo bridge with a three way switch for an Out2. Some of the sounds people are getting by blending the two are incredible.
The kit I used was a Harley Benton from Thomann.
The classic “Buy a reputable brand, cut costs and coast along on the reputation until you can sell off all your shares and move on to another company”. Bonus points for using
legalised embezzlementshare buyback.
This is the sort of thing that the old internet could really deliver on. Chances are, a search query could lead you to some guy’s hoodie blog, and he just liked hoodies, and posted honestly about them.
Now, it’s all a mess of SEO pumped affiliate link lists filled with crapware. If the query is even thinkable, there will be AI generated pages stuffed with sponsored links, ready and waiting for you. And with search engines preferring recent results, that’s the type of page you’ll be served.
I’ve had decent luck using marginalia search to seek out some of those old internet type results. Obscurity works as a barrier to corporate infiltration. Plus you get page results that don’t have a million tracking and analytics scripts running on them, which is refreshing.
Whether they’re trustworthy or not I’m not sure, but they’ve not failed me yet
I tend to go for those “2024 top 10 x” lists, jabra 65t was a very good recommendation from there, my toaster, probably a bunch of other things I’ve now forgotten about
Very happy with my jabra headphones as well. May not be best price for performance but they are solid enough. (85h elite and 65t active)
They generally aren’t trustworthy overall, but many of those lists that have decent suggestions are just stolen content from more legit sources that don’t SEO farm and get buried in search engine results.
Just get a cheap one in KMart. It’ll likely fall apart, but it still comes from the same sweatshop as your favourite brand and you didn’t pay so much for the months of wear you got.
KMart?! What is this, 1995?
They’re still kicking in Australia
Nice! I will have to make the trip hahahah
Gotta wait for the blue light special though.
Because Reddit is infested with bot accounts at this point I tend to trust older threads over newer ones. Easy as hell to buy accs to say a competitor sucks dick
Inb4 reddit removes dates from posts/comments
Can we all just take a moment and be thankful that Lemmy exists? Because if it didn’t, I don’t know what I’d do.
Being miserable on reddit instead of being [insert feeling here] on lemmy?
Or it’s just late stage capitalism where the product has truly gone to shit.
Por que no los dos?
