Looks like they are using it to warm the screen adhesive so they can remove the screen and repair the phone.

I don’t know where you can get them from central Europe, but Gaff and Go is a British company that makes really nice gaffs. Their “magic gaff” line works well for me. I get them shipped to me in Canada.

I sometimes wonder why anything is wrapped in plastic at all. So many products are wrapped in plastic for seemingly no other reason than to indicate that it’s unopened.

You might have trouble getting free unrestricted library cards if you don’t live in the area that the library serves. They are usually paid for with taxes and aren’t there to serve people outside their community.

If you’re willing to pay for it, I know that the Ottawa Public Library in Canada offers membership for $90/year to people living outside Ottawa. You may find something similar at other libraries.

The Libraries and Archives of Canada will issue a card too, but you have to visit the archives in person and have a reason you are using the archives and not another library.

I’m no fence installer or anything so I don’t know if it’s possible, but instead of replacing the fence, could the chain link part be removed from the posts and flipped over and reinstalled?

That depends on your goal. If you want something free, open source and self-hosted then Plex isn’t the best option and you’d do better to look at Jellyfin or Kodi.

Make sure you’re buying 14/2 or 12/2 that has a ground wire and running that back to the breaker box. I saw the job you did with the big cable in the floor and it didn’t look like you ran a new cable that had a ground wire. It’s best to replace the old shoddy stuff with circuits that are up to code, even if you’re doing it DIY and your area doesn’t require homeowners to get it inspected. The codes are designed to prevent fires and loss of life.

Exercise would still increase your respiration rate. So you would be incentivized to get more steps either way.

You can mark it either red or black, but you already have one black wire, so it would be best to mark it red, just to differentiate it.

Since you went with 10/2 for a 240v outlet that means your cable will have two hots and a single ground. But the cable you bought will have a black, white and bare/green wire. Make sure that you wrap both ends of the white conductor with red electrical tape to indicate that it is also a hot wire. White normally indicates a neutral, but since you won’t have a neutral wire in this cable, it’s important to mark it. Otherwise someone else may work on this outlet in the future, see a white wire, assume it’s a neutral, wire something up with it as a neutral, and give themselves a pretty bad shock.

If you’re in North America, which I assume you are based on the 120v wires, then your assumption about 240v power is a bit off. Both wires can be a hot (120v) wire, 180° out of phase from each other, so they add to 240v. In this case, a neutral wire isn’t necessary to carry the current back, the other hot wire does that. A neutral wire may be used, but then there would be 4 wires.

The ground wire and the neutral wire actually connect to each other in the panel, but it’s not safe to use a ground wire in place of a neutral, so definitely don’t wire it to the neutral on the outlet.

If you are unsure of what’s going on with this set of wires, you should really call an electrician to help. Wiring a standard 120v outlet is something a homeowner can do, but identifying an old 240v cable on a dubious circuit is definitely something a qualified electrician should do.