ok, to be clear, im not educated in this field, but im a hyper nerd in this kind of shit, so i feel like i have some pre-existing understanding here.
notably, this is a take on planetary gear sets, which are notoriously, gear sets. They’re fine. There’s nothing weird about them, except for the fact that they reduce on an axial measure, which is really weird but super useful for things like wind turbines.
Functionally, it’s pretty clever, the vertical motion is obviously useful, the side to side deflection is also going to be pretty important because nothing is perfectly rigid. I’m curious to know how maintenance is going to go, it might be a bit of a nightmare. I assume it’s not that bad though, probably easier than a transmission. Which we no longer have in an EV.
If it can be made in volume, reliably, and for a reasonable price, this is definitely the future. Yeah, i mean really my only concern would be maintaining it. Which im guessing it’s just an enclosed gearset in an oil bath, so probably pretty trivial. Just replace the oil every so often (or as per every modern vehicle, throw it out and replace every 100,000 miles or so)
Curious how they’re going to seal the enclosure to the environments though, probably a boot, im sure that’s going to be equally as problematic as every CV boot ever has always been so nothing new there really.
Thanks for the insight! My uninformed view was that from a moving parts perspective it was a lot fewer than a transmission and traditional drivetrain, so it seemed like there would be fewer points of failure and less complicated maintenance. It also seemed easy to produce, even with tight tolerances it’s pretty mechanically simple.
It was hard for me to see if it was just marketing hype though. It’s interesting that wind turbines use planetary gear sets! I never thought about it before beyond “wind spin blade= electricity.”
ok, to be clear, im not educated in this field, but im a hyper nerd in this kind of shit, so i feel like i have some pre-existing understanding here.
notably, this is a take on planetary gear sets, which are notoriously, gear sets. They’re fine. There’s nothing weird about them, except for the fact that they reduce on an axial measure, which is really weird but super useful for things like wind turbines.
Functionally, it’s pretty clever, the vertical motion is obviously useful, the side to side deflection is also going to be pretty important because nothing is perfectly rigid. I’m curious to know how maintenance is going to go, it might be a bit of a nightmare. I assume it’s not that bad though, probably easier than a transmission. Which we no longer have in an EV.
If it can be made in volume, reliably, and for a reasonable price, this is definitely the future. Yeah, i mean really my only concern would be maintaining it. Which im guessing it’s just an enclosed gearset in an oil bath, so probably pretty trivial. Just replace the oil every so often (or as per every modern vehicle, throw it out and replace every 100,000 miles or so)
Curious how they’re going to seal the enclosure to the environments though, probably a boot, im sure that’s going to be equally as problematic as every CV boot ever has always been so nothing new there really.
Thanks for the insight! My uninformed view was that from a moving parts perspective it was a lot fewer than a transmission and traditional drivetrain, so it seemed like there would be fewer points of failure and less complicated maintenance. It also seemed easy to produce, even with tight tolerances it’s pretty mechanically simple.
It was hard for me to see if it was just marketing hype though. It’s interesting that wind turbines use planetary gear sets! I never thought about it before beyond “wind spin blade= electricity.”