I got the T460 refurbished and I really didn’t want to run Windows 10 on it. I last used Linux for any real length of time a good 20 years ago, so I’m pretty inexperienced with it at this point and I had to figure out how to install it myself.
They made it unreasonably difficult to first install an OS from a USB stick. I had to go into the BIOS, turn UEFI to legacy, turn off secure boot, reboot to boot from the USB stick, install Mint, then turn legacy back to UEFI to get it to boot from the hard drive. This took about 2 hours of trying to figure it out by doing a lot of forums reading.
I do not blame the Mint community or the Linux community as a whole. There is absolutely no reason that it should have been that hard to install Mint on that notebook.
I don’t even think getting into the BIOS once time should be necessary, but changing a BIOS setting so you can install the OS and changing it back so you can run the OS off the internal drive is just ridiculous and I find it hard to believe Lenovo couldn’t have just made it easier. I’m fairly convinced this was intentional on their part.
I’m not an IT professional or anything, but I know enough to figure this stuff out with effort, but it shouldn’t have taken that effort. It should have been almost plug-and-play. This is 2024. The notebook isn’t even 10 years old.
Is there actually a good reason for this or are they just kissing Microsoft’s ass?
I recently installed it on a t480 while distrohopping. I didn’t need to turn off uefi, secure boot has been off since i got this laptop and i never turned it back on. My best guess is that you either did something wrong when making the live media, or during the installation. Next time try using ventoy, it’s a really useful tool.
I’ll try Ventoy next time, thanks. I just followed the install instructions on Mint’s website which says to use Etcher. Maybe that’s the problem.
Also, did you manually edit your partitions? It might be related to your bootloader being in
/bootinstead of/boot/efi. The first one’s for legacy bios, and the second is for uefi.Nope, I didn’t do that either.
are they just kissing Microsoft’s ass?
This. 100%. It’s why I don’t understand folks recommending Lenovo laptops to run Linux on. Lenovo is in bed well Microsoft and caters to whatever they want. SecureBoot, modern standby, etc. We need more vendors supporting open source firmware like Coreboot.
Lenovo also no longer deserves their reputation for durability. They haven’t for at least a decade. Their usb-c charging ports wear out super fast
Edge ISO might have helped. It even supports secure boot.
I’m not familiar with Edge ISOs because I am a total novice here, but Mint’s website says, “If you cannot boot or install Linux Mint because your hardware is too recent and is not properly detected, you may get better results with the “Edge” ISO image.” This is 2016 hardware, so would it have applied?
Probably, sometimes I feel like some of the linux community thinks stuff made in 2015 is ‘recent hardware’ lol
I understand your perspective but the steps you mentioned are what you’d expect when installing an os. Even windows 11 would require you to turn on TPM which, for some, might be a super painful experience.
I have never had to install an OS where I had to go into the BIOS multiple times to change settings back and forth.
Still beats setting IRQs. Or dip switches, if you’re really old. Expect to have to fiddle if you want custom. You want fisher-price, buy a Mac.
I am that old and I admit, that is definitely true.
I’m not saying I want Fisher-Price here. I just don’t think there should be this much of a challenge to install Linux on an old ThinkPad like this.
I have no problem with Linux not being a push here dummy OS overall, but not only having to change BIOS settings twice, but having to spend two hours surfing around trying to figure out that was the issue, especially when it was installed but wouldn’t boot… that’s ridiculous. From what people are saying, it sounds like it’s a combination of Lenovo being dickish and Mint not supporting it well enough.
But whatever, it’s installed now and works fine. I just needed a rant after going through that.
Being unable to boot from a USB drive in UEFI mode sounds like a Mint problem. I just booted from an Ubuntu LTS USB on a similar machine, installed with all default BIOS. Haven’t touched Secure Boot either. No trouble.
Hm. Maybe I should have tried a different flavor of Linux in terms of ease of install. But Mint seemed like the best choice for me and now that it’s actually up and running, it’s fine.
By all means, if it works already, don’t fuck with it.
This community hates on Ubuntu but these are the kinds of corner cases that can make or break a new user’s journey. Experienced users can resolve those with no emotion and we often discount the difficulty and importance of such issues to less experienced users. There’s been a lot of work put in Ubuntu to tackle these kinds of issues - paper cuts. Recall the One Hundred Paper Cuts project. This is why I won’t stop recommending Ubuntu LTS for new users.
It’s good to know for the future if nothing else, so I appreciate it.
That’s surprising, Thinkpad x240 owner here. With all the os i installed on it i never had to do such overcomplicated manipulation, just bios entering + boot on usb.
Maybe it’s just a 460 thing?
That sounds extremely infuriating! Regarding Lenovo and Linux Mint, I actually had a very good experience with them a little over a year ago. I bought a new IdeaCentre 5i pre-built desktop tower and had zero issues installing Mint on it. All I had to do was press F12 and select to boot from the bootable USB to install, no screwing with the BIOS or anything. But I’ve never tried installing Linux on a laptop. I only use desktops.
It was so stupid. F12 should have been all it took, but it didn’t even recognize the USB drive existed.
You probably should use uefi as it is better in a lot of ways.
…what?
It tends to be more reliable and is easier to work with
Yeah, okay, but what has that got to do with the price of fish? I think you’re misunderstanding the post entirely:
When OP mentions going into the “BIOS” they’re using the term as the common name for the device settings menu that you can enter on boot. It is however a UEFI-based device. What OP had to change was the “Boot Mode” from UEFI Mode to Legacy (or BIOS) mode. This affects how the UEFI looks for Operating Systems to boot, forcing it to search for Master Boot Records rather than EFI partitions, and booting those in a compatibility mode. This seems to be a bug with Lenovo’s implementation of UEFI, as it did not detect the Linux Mint Live USB’s UEFI partition. Most Live USB’s are still set up with a backup BIOS bootloader. OP then had to go back into their “BIOS” (UEFI) and re-enable UEFI boot mode to be able to boot into their newly installed Linux Mint partition.
What I’m struggling to understand is why you gave the advice “you should use UEFI” when OP was already using a UEFI-based system…
UEFI looks like another over-complicated proprietary shit that make PC more and more locked.
It is not
As someone who also installed Mint on a Lenovo, I feel your pain. The only difference is that I was aware of the BIOS setting before I did the install because I’d read some forum posts preparing myself for the install.
Well done. It’s a Lenovo issue. Had to do the same thing recently for a friends laptop and did the same dance.
I have some IT background so kind of knew what to look for but it still was a pita.
It’s just so stupid. Obviously other notebooks don’t have this issue. Some people are blaming Mint for not doing anything about it, but I’m still blaming Lenovo mostly.
Wow what a ride. Congrats on making it work, I’m not sure if I wouldn’t have given up at some point. Great job!
About kissing M$'s ass, don’t get me started on updating the BIOS on a HP Laptop, they require you to do that in Windows cause it’s the only way to get their downloader to run. So it’s not only Lenovo’s Laptops that don’t play nice with Linux.
I didn’t even want to take a chance with an HP considering how fucked up their printers are.
I have HP Zbook, Linux works fine. There is a BIOS bug that linux boot acknowledges and moves forward with…just an annoying few intial mesaages during bootup
That’s what you get when you buy Lenovo. It can’t even run Windows properly most of the time how did you expect it to run Linux?
Seriously if you go into any large company and ask why they don’t use Lenovo they’ll simply tell you that the failure rate of those machines is way to high to be worth it. Like order 50 and only 10 are in working condition after 2 years… or a simple USB 3 cable running along the computer will make it slow because there isn’t enough shielding on the machine.
how did you expect it to run Linux?
Because I asked in this community and got a bunch of people who said they ran Linux on it and it worked just fine? Which it does now that it’s been installed.
Hardware recommendations are really hard, brands to a lot of shit and there are a LOT of small details that make it so a small revision on the same model can make or break compatibility with Linux.
For me, personally I always got the best result with HP EliteBooks from 2 or 3 generations bellow the current one and the latest Debian. But again, that’s just personal experience, nobody can guarantee you that you won’t pick a very specific EliteBook with some awkward detail and things will fail.
I’m surprised HP notebooks are trustworthy at this point.
Depends on the line… the high end enterprise products (EliteBooks) are very solid and good, they also provide very good servicing, every piece of those machines is replaceable even screws have serial numbers and can be ordered from HP.
ProBooks are a mixed batch, some are decent others are total garbage. Consumer grade HP mostly follows the same trend, if you go for machines that are “Apple-priced” they’re good, otherwise crap. Still not as crap as Lenovo became after China.
You should have been able to boot from USB and install fully in UEFI mode with Secure Boot enabled, but sometimes the method you use to make the bootable USB can screw that up. I’ve always had good luck with Ventoy.
I had to go into the BIOS, turn UEFI to legacy, turn off secure boot, reboot to boot from the USB stick, install Mint, then turn legacy back to UEFI to get it to boot from the hard drive.
That is ridiculous and it does sound like a Lenovo problem.
I’m running Mint on a Surface Laptop (which was difficult to install because Microsoft), but getting Secure Boot working only required changing the UEFI settings to allow non-Microsoft Secure Boot certificate. With that set Mint boots just fine both with Secure Boot enabled and disabled. So do USB installation ISOs.
Secure Boot can still be a pain. To get Virtualbox working with it enabled required signing several kernel modules which took a while to figure out.
Mint is great though. After distrohopping for years I finally decided I wanted to just use the OS and GUI, not play around with them. The latest versions of Mint just work once they’re installed. For me, going back to Windows (especially W11) feels like punishment. I hope you enjoy the switch.
Admittedly, I’ve only been able to play with it on and off today, but I am really liking it so far (except Firefox, which apparently no longer has a compact mode). I’ve had to use Macs for years for work reasons, but I don’t have to anymore and I said to myself that when my ancient Macbook died, I would replace it with something that runs Linux. MacOS is okay, not terrific (I hate how much RAM it uses though). I don’t mind using it, but I am not going to pay Apple’s prices now that I don’t have to just because it’s less annoying than Windows. So Linux is the perfect answer!
MacOS is okay, not terrific (I hate how much RAM it uses though).
On that note, I’ve been amazed how well Mint works with just 8GB of memory. I’ve had Firefox and Chrome running with plenty of open tabs, Thunderbird, Libreoffice Calc, and a half dozen other programs open while running W10 in Virtualbox. Mint just takes it in stride.
Use KVM I stead of Virtual box. It is way faster
I use a W10 VM for processing individual files once a week or so. With the required 2 Windows programs it takes about 3 minutes to complete the task and shut down the OS. Not worth switching.
Virtual manager with make it run so much faster though. Also its not a bad idea to have a few VMs just for fun anyway
