House DeWalt: The Builders
House Ryobi: The Slapjobs
House Milwaukee: The wishes they were house DeWalt
House Makita: Quality prevails regardless of how little I use my tools.
Unmentioned:
House Bosch: House Makita but doesn’t like Asians
House Metabo: House Milwaukee but green
House Rigid: wow these are fuckin cheap
House Worx: Tools take a backseat to Yardwork
House Metabo HPT: My wife says they’re great
Nah Makita is trash, unless you’re talking LXT, which is 36 volt. Most of the Milwaukee stuff comes out on top on the torque test channel on YouTube.
But also don’t forget House Skil: Issue
House Bauer/Atlas/Hercules/Warrior: Life is transient, why does your tool or battery need to last longer than the job?
Rigid are mostly Milwaukee tools but cheaper.
House Harbor Freight: Safety squints aren’t enough danger
Where is the power fist / what ever is cheapest?
We are a cheap garbage household 💪💪💪💪💪
DeWalt gang, stand up!
Can’t, sold my kidneys to afford these and I’m too sore.
But im a craftsman…
Makita still going strong after 15yrs of use. They were the best at the time and still works amazing today with backwards compatibility batteries. My 15yrs old driver can use a brand new battery that a 2023 model uses.
Drill a 1/2" hole through 4" thick stainless without a hiccup on a single battery. Then tap the hole on the same battery. Impressive power and reliable
4 inch thick stainless steel? What in tarnation is that for?
Adding a lift point. Did 12 of them and the driver was on the toasty side when done
A lift point on what, though?
Large pieces of billet material, lift point added for moving between machines on the first 2 operations. Afterwards the item is light enough to pickup. Roughly 323lbs of material removed in the first 2 operations. Then the items went on to 6 months of machining to complete them. Very expensive one off pieces manufactured during R&D. Final products are low number runs of 2-3 items that take 5 months to manufacture. This was a single piece in a larger piece of equipment that I manufactured. Largest tolerance on the item was 0.0005" with true position at 0.0001". Challenging item to handle and machine
What were they parts of?
What I’m more intrigued by is that OP didn’t say that they use any kind of guide or frame to hold the power drill. Try drilling 10cm by hand straight enough that it makes sense to tap the hole.
I dropped my locking, variable speed, single direction, corded drill with the chuck key electrical taped to the cracked plastic cord on a board and the hole I needed formed naturally out of fear.
You need to know that most power tools are ultimately owned by only a few brands
Milwaukee and Ryobi for example are both owned by TTI but the Marketing is strong.
https://www.protoolreviews.com/power-tool-manufacturers-who-owns-them/
Heck yeah! Makita is just Makita!
Japanese and over 100 years old…
Its also worth mentioning that adapters are available to convert between battery systems. If you’re on Milwaukee and want to buy a DeWalt palm router (which is superior IMO) then you can just get a converter to use it with a Milwaukee battery. You can keep the converter in the tool itself, and most tools don’t mind this.
The exception is Ryobi. Converters only exist one-way, since Ryobi still uses “stick” type batteries for low voltage stuff. The opposite converter could theoretically exist (say, to use a Ryobi battery with a DeWalt router) but it would be very large and bulky and so nobody really makes them.
Ryobi batteries in general are very bulky. That 12 AH is like strapping a boot to your tools. It’s also seemingly their weak spot, as all I read is people complaining about their batteries.
My dad rejected those answers, instead, he chose something different, he chose… Festool!
I guess when you have Malfoy money you can afford to go full death eater.
FYI there are adaptors for all of these batteries so you’re not actually stuck. I got one on Amazon
How about dads who went with the discount hardware store’s brand. It’s easily 1/4 Dewalt prices and comes with a 5 year no questions asked warranty? I spent like 80euros on two 18V cordless drills. I keep the receipt in the case they came in, and in the last 8 years I’ve abused the shit out of them, and have had at least one replacement. Just like Dewalt, makita, milwaukee, and ryobi, I have several batteries and charges, and a plethora of tools with the same battery.
I went to the store with a beat up drill, and the pimply faced teen at the register was like wtf?!? But the manager didn’t want the full story on the phone. Only three questions “is it [store brand]?” “is the receipt less than 5 years old?” and “what are you calling me for then?”. New drill, new case and new receipt. Oldest drill is about 4.5 years old now, so I guess that I have to torture the hell out of it and get a new one with 5 more years.
People talk shit about Harbor freight, but I have walked into that store with a box full of burnt up power tools and had absolutely no problems getting my money back or new tools. That bonus warranty for two dollars has paid for itself I don’t even know how many times. And you don’t have to buy a new warranty on every tool. You just have to buy that once and you get unlimited exchanges.
Not a dad but heavily into the Makita gang. As a German I should be into Hilti or Metabo but Makita just hits the sweetspot of quality and pricing for me.
You forgot Bosch! It’s a shit company in my opinion though… they also produce in Chinese prison camps
My tools?
Wired: DeWalt
Battery: Makita
Pneumatic: Bosch
Hand: whatever’s in the box…
Which ne is the Harbor Freight’s Warrior & Hecules house?
