• SirDerpy@lemmy.world
    link
    fedilink
    arrow-up
    0
    ·
    3 months ago

    (If you) are sure you understand how they work

    And

    If you really need one

    I understand how power systems work. But, I can’t come up with a situation where I’d use a male-male AC cord rather than a safer and more reliable alternative. Most relevant is simply cutting off the female termination and reterminating through a breaker to the outlet ($15 and 15 min).

    • Semi-Hemi-Lemmygod@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      3 months ago

      Picture this: It’s 8pm in early December. You’ve been hanging lights on your house since about 10 this morning, and it’s long after dark. As you’re laying the last section, you realize that you’ve got two female connectors next to each other. Do you tear it up and do it again, or do you hack a solution together so you can go inside and thaw?

      • SirDerpy@lemmy.world
        link
        fedilink
        arrow-up
        0
        ·
        3 months ago

        The suburban solution is to create a false dichotomy to rationalize outsourcing a simple electrical issue to Lowes.

        The hack solution is to cut two ends and reterminate them.

        I’d hack it. To do it well it’s 8 crimps, wire loom, and harness tape. So, 10 minutes and $5.

        • isolatedscotch@discuss.tchncs.de
          link
          fedilink
          arrow-up
          0
          ·
          edit-2
          3 months ago

          and you’d be right. If you are sure about it, and you know how it works, just make it yourself, so that you don’t need to put anyone else in danger of getting sued.

          The reason hardware stores don’t sell them is that people WILL use them in a dangerous way, and they don’t want to be held responsible.