You must log in or register to comment.
My refrigerator fridge machine that fridges and refrigerates is from the early 2000s. Still works like a charm.
It even has a square on it that says “OK”.
Zero kelvin? That sensor is broken…
I still have my $120 fridge from like 2010-2011ish back when Sears was a thing and it’s still going without any issues. Zero maintenance ever needed thus far.
No ice maker in it, and the freezer part is on top like in the pic. Apparently if the freezer is on the side instead of on top, those break down way more often.
I have a freezer on the top too. It did collect some ants for whatever reason (my house is a literal ant colony at this point) but it still works OK, just like the bottom part (where it says OK).
damn, can’t argue with that, OK it is
Those things have worser energy efficency and probably contain worser refrigerants
Today’s products are built to just barely cross some finish line and not a day longer. It’s bad for you, and bad for the environment.
For real, we bought a fridge in November and it is already breaking
Back when my dad bought a new whirlpool fridge, it didn’t take long for the LEDs inside to start failing.
“…I am also the size of a dorm fridge”
I used to rent this tiny little house from an elderly couple a little over a decade ago. It was their first house when they got married in the late 40s and they’d been renting it out since they moved to a bigger house in the 50s. In all that time the refrigerator has been replaced ONCE in like 1968 and that fridge still worked perfectly when I moved out lol
Moreso, the fridge will stop working in two years cause that is when their subscription cloud service to access your fridge will be updated with firmware that is no longer compatible.
Also the required app will no longer be supported
My fridge doesn’t have a TPM chip and won’t upgrade to FridgeOS 11.
But why? Like what is failing so often in new fridges?
Shitty solder in wiring. Plastic for things that used to be aluminium, aluminium for things that used to be steel.
Just cost cutting by value engineers. I remember reading that the 3rd year of a cars model was probably the best, as they’d worked out the kinks in the design and hadn’t watered everything down much… I couldn’t back that up if you wanted a source, however
We bought our current car used years ago with a similar philosophy - it was the first year of a new change, and they hadn’t changed or recalled anything in the few following years. Combine that with a one car owner locally, and it obviously was a good buy at 17 years old running strong.
But I will say even the best car makes, models, and years have their lemons. You have to look hard at each car’s history and evidence to really win. We got pretty lucky.
Source: I work in/with electronics manufacturers
Tl; dr - a mix of value engineering and consumer preference. You wanna buy a $3k TV, or a $700 TV? How rock solid does your automatic sprinkler really need to be, compared to a satellite radio in the Sahel?
Per IPC industry standards, there’s three classes of electronic workmanship/quality control used:
- Class 1: It works, just about. Shoddy soldering is okay as long as connectivity is maintained. Passing a QA test may be as simple as “it runs when powered”. This is where most consumer grade stuff lives: calculators, watches, flashlights, etc.
- Class 2: Better built with generally more QA. Testing usually involves actually checking for function and different modes. Generally used only on commercial/civil government stuff like traffic lights, power controllers, heavy machinery - anywhere where reliability and longevity is worth paying more for.
- Class 3: Complete process control and 100% coverage function (and almost always) burn-in/stress test cycles. Top quality and cost, typically only used for military, aerospace, or medical - where stuff failing means people die.
Thanks, that’s really interesting
Compressors fail way too often nowadays. The higher priced old ones were built sturdier and if they didn’t fail in a year because of a defect they run almost indefinitely.
The idea that they never fail comes from survivorship bias.
All the control boards are always a popular thing to fail. They always cheap out on the components and out the board where it’s done get moisture damage.
Remember, friends don’t let friends but Samsung or LG appliances!
(Also, long lasting appliances still exist, you just have to be ready to pay the price, otherwise get something from the Maytag family)
citing Rossmann?
I’ve got no idea who that is so no, I wasn’t knowingly quoting them
he’s involved in right to repair and has youtube channel where hem mostly talks about how brands try to avoid questions on repairability and sustainability
There’s some appliance breakdown vids (idk if Rossman is one of them) but the gist is Samsung and LG like to put cheap plastic parts in high wear locations which inevitably fail.
Fridges are dead simple appliances. A compressor and evaporator coils with a temperature sensor. There’s absolutely no reason they shouldn’t outlast you and everyone you love.
It’s insane these “premium” brands are built to fall like they do.
Real premium brands do last, but not everyone wants to pay 10k for a fridge
Premium brands are not industrial brands. Goal of premium brands is to be as expensive as possible.
That’s the problem. A lot of those high-end, expensive appliances are built just as shitty as the low-end, basic models. The difference is just some bells and whistles and a higher price tag.
I have no problem paying extra for a higher quality, better built appliance. But the challenge is differentiating those from the low quality, built as cheaply as possible appliances that have just been marked up with a premium price tag.
At least when I buy the cheap, shitty model, I get what I paid for.
Sub Zero, Thermador… Looks industrial to you?
An insulated box with a decent compressor does not cost 10k. Making a compressor that fails after 2 years is actually hard to do, something both LG and Samsung spent time and money to achieve.
Consider, for example, that nearly every car manufactured with an AC. Which is exactly the same tech as a fridge. Yet you rarely end up needing to replace the compressor on your car. You might need to recharge it or clean it, but not replace the compressor. 10k of your car price isn’t the HVAC.
Just saying, that’s the price for premium brands like Sub Zero or Thermador, but they have their reputation and it’s very very good
I mean, having to replace a fridge every few years because it constantly breaks in a way that’s uneconomical to repair will cost you a lot more in the long run.
That’s the thing, it’s more expensive being poor.
You’d be better off getting a 2nd hand quality brand from a wealthy suburb when they remodel their kitchen every 5ish years or so.
Sure it costs more in the long run, but the majority of people live paycheck to paycheck, do you think they want to go and pay 25k for a full set of appliances just so they’ll save money over 30 years when they can barely afford to pay for their basic needs?
Even second hand, they’re still way more expensive than the basic shit from economical brands…
Bit of a straw-man argument there: firstly you don’t need to spend that all in one hit; the break even point is a lot sooner than 30 years; and lastly, paying to replace cheap shot that breaks quickly with more shit that breaks quickly is one of the traps that keeps prone living paycheck to paycheck.
My two examples below:
Samsung dryer died after 3yrs, out of warranty, broke in our 20s, couldn’t afford to replace it. Lucked out finding an ANCIENT Miele condenser dryer on Marketplace for $50. Not only did that thing last us another 3 years before it started tripping the circuit breaker, it was cheaper to run than the old unit and ended up saving us enough money that we were then able to invest in a brand new Bosch unit that’s still going today (7+ years).
LG refrigerator died in a little over 3 years, due to a known compressor fault; uneconomical repair even though it was still under warranty, so we got a full manufacturer’s refund. We bit the bullet, did our research and went with a Made in Japan Hitachi model. It’s always outlasted the LG, and is again more energy efficient that we’re saving a few bucks a month on electricity.
I will reiterate; it’s expensive being poor. Buying a better quality second-hand unit rather than a new ‘commodity brand’ appliance is just one of the small ways to make things a little less expensive.
So “You live paycheck to paycheck? Just find cheap stuff until you decide to bite the bullet and get a loan to buy something that will last!”
78% of people in the USA live like that.
Checking what a fridge cost you in 1980 in an old Sears catalog, you’d be paying $4000 today accounting for inflation.
But people compare their reliability to 1000$ fridges today
Honestly I don’t get why Rossman cry so much about “he expected that his $2000> TV would not track him or at least have the option turned off by default.”
Why shouldn’t they? Why would anyone expect in the first place that by buying a more expensive product they are going to care about your data? Obviously it benefits them to sell everyone’s data, from Rossman’s point of view it sounds like people who buy cheap products deserve to have their data sold because the company is making a loss by selling them the product.
I usually agree with Rossman’s points, but this one in particular sounds ridiculous to me.
Yeah he’s really upset about LG, but it seems like everything tracks you these days. Seems a bit shortsighted to just shit on LG and no one else.
If you open his channel, you will see how he shits on all anti-repair crapufacturers.
He shits on everyone all the time. It’s not exclusive to LG or even Apple. It’s just whatever happens to come to his attention. Which is basically pick a company and they’re doing something horrible.
No idea who that is
My bad, I was answering another user in this thread.
from Rossman’s point of view it sounds like people who buy cheap products deserve to have their data sold
I watched him and it is obvious he is against “You bought from X? Lol, screw you!” mentality.
Anything from BSH group is good from what I’ve heard online from other netisens
Which is
- Bosch
- Siemens
- Neff
- Gaggernau
Miel are also good especially for vacuum cleaners
All of this information I remember from reddits buy it for life subreddit which really should have a lemmy version
*Miele ;)
And yeah, mid level is very good too!
Buy it for life is on lemmy! Idk how to link it, but search for it and it should pop up
@x4740N@lemm.ee @FrowingFostek@lemmy.world @@Kecessa@sh.itjust.works
The Community on slrpnk.net seems to be the biggest and most active, the second biggest is on sh.itjust.works.
and for linking you can do
\[Name of the link](https://nameoftheinstance.net/c/nameofthecommunity)or you can just do !buyitforlife@slrpnk.net so you can visit using you own home instancehave a nice day! :-)
For people interested an extensive report by French appliance store after sale service. It gives the reliability of each brand. There is a note for the reliability, ease and cost of repair.
It’s only in French unfortunately : https://www.darty.com/achat/services/barometre-sav/barometre.html
I second this motion.
I like our used Samsung dryer. For basic drying. It has all those other bells and whistles that I don’t care about, but it’s done well for years. That damn finished drying tune though…with the option to turn it off or…not turn it off. omg
I like the washer and not the dryer. Had the set for 4 years. No issues with the washer but the dryer literally leaks lint. The trap doesn’t catch it and it gums up my vents in 2 months.
A fridge is a fridge, the basic mechanical working principle of it didn’t change over the past 40 years. But people have a lot more expectations put into what a fridge should be able to do nowadays, and electronics or complex mechanism such as the ice maker is generally the first to break on a modern fridge.
The moral of the story is, don’t buy a fridge with an icemaker or have a tablet attached to it, and you should be fine.
I moved into a dated house that came with dated kitchen appliances 70/80s. I’ve updated the floors under, the water line and gas line to them. Mostly everything around them. I’ve still kept the appliances. Still work great.
I’ll keep my money and the fridge that still does what new fridge does, keeps shit cold. And the stove that does what a new stove dies, make shit hot.
Its not fully the fault of tech companies, yeah there is some planned obselecence. But there won’t be anymore “I will outlive you” appliances cause the more mechanical it gets the more cheaper and easier it is to repair and they also tends to have less individual components.
I don’t think any of those new smartish watches even from the best of Swizz makers could last like it did 100years ago.
Yeah, but can you survive a hydrogen bomb blast in a 1980s fridge? No, you need a 1950s fridge for that.
It’s the lead lining.
Thnx Indiana
We called the dog Indiana.
