A Boeing 737 Max 8 jet experienced a rare but potentially serious problem recently known as a Dutch roll before landing safely. The Federal Aviation Administration is investigating the cause of the incident during a Southwest Airlines flight last month. Less than an hour after taking off from Phoenix on May 25th, the plane experienced an uncontrolled side-to-side yawing motion known as a Dutch roll while cruising at 32,000 feet. The pilots of Southwest flight 746 were able to regain control and the plane landed safely in Oakland, according to a preliminary report from the FAA.

[…] The Boeing 737 Max 8 jet involved in the Dutch roll incident is less than two years old. According to the FAA, a post-flight inspection revealed damage to a backup power control unit, known as a PCU. That system controls rudder movements on the plane’s tail. The plane remained in Oakland until June 6th, when it flew to Everett, Wash., where one of Southwest’s maintenance vendors is based. Boeing has been working to rebuild the trust of federal regulators and the flying public since a pair of Boeing 737 Max 8 jets crashed in 2018 and 2019, killing 346 people. Earlier versions of the 737 were involved in several accidents and crashes during the 1990s that were ultimately blamed on problems with the tail rudder.

  • methodicalaspect@midwest.social
    link
    fedilink
    English
    arrow-up
    0
    ·
    5 months ago

    Rudder PCU? Like the United 585, USAir 427, and Eastwind 517 rudder PCUs?

    Boeing. The 737 was introduced in the 1960s. Design something new and move on.