• 0 Posts
  • 23 Comments
Joined 1 year ago
cake
Cake day: June 26th, 2023

help-circle
  • It shouldn’t mess with your current routing but if you’re running other VPNs you may run into issues.

    After you join the machines to the tailnet, each machine gets a new IP address ( only visible to other machines in the tailnet), by default it’s a 100.x.y.z you can check the tailnet for the device IP.

    Now you can keep the port closed on your router and it will still be accessible over the usual lan ip and port. But when you want to access remotely, turn on tailscale and connect using the tailnet IP.

    Another cool thing you can do with this setup is turn your home server into an exit node. By default it will only route things that are in the tailnet (100.x.y.z subnet). But if you turn your home server into an exit node you can funnel all your traffic back through the exit node. Instant free VPN back home!



  • Unencrypted HTTP can mean that anyone can see your traffic as it passes through their network. Your ISP will see that traffic. If you’re streaming pirated music and you’re in a country that cares about those things, might not go very well. From a security stand point though, you still wouldn’t want to trust the authentication on the open port. A vulnerability may exist that you don’t know about. It’s always better to keep them closed and add another layer or two between your home computer and the public.

    Tailscale let’s you tunnel into your home network without opening any ports, and it encrypts the traffic. Much safer way of doing it.











  • Woah, naw 130 meters is not far at all for an AR-15. Max effective range for a point target is 500 meters, meaning you can accurately hit an average sized person at that range. If you have something like a standard issued trijicon ACOG RCO, look at the BDC (Bullet Drop Compensation) lines go all the way to 800m. Interestingly enough too, the width of those lines is the width of an average person’s shoulders at that range.



  • I can create tools for my company that launches right out of ConfigMgr Software Center and other technicians can contribute without needing a programming background.

    Now this is a bit of magic I would like to learn. I read through PowerShell in a month of lunches a couple of years ago and it’s saved my butt a couple of times. I’m due for a re-read though. Would you have a source on where I could go to learn more about creating GUI applications in PowerShell?