They look complicated but it’s not too bad when you get used to the idea. In normal use it’s basically a four speed H pattern with two different ways to increase the number of gears. You have a range selector to give you 8 main gears (you shift 1 through four in low range then flip to high range and move back to 1 position to give 5 through 8) and then you have a splitter that gives every gear a high and low ratio (in order you’d go 1st low -> 1st high -> 2nd low -> 2nd high -> etc). Normally you don’t need to use all the gears so you can skip some of the sequence - particularly when lightly loaded. Lo position is a particularly low ratio, and reverse is as per normal except you can split it to have a somewhat faster or slower reverse gear.
I’ll admit I haven’t driven a full 18 speed but I’ve driven 9 speeds with a range selector and a 10 speed with a splitter and both were easy enough to learn so combining the two doesn’t seem as daunting as it might be to those who haven’t tried either.
I couldn’t get the double clutching timing right, and my instructor was a cunt who got on my nerves the whole day of training. Also because they’re a gated gearbox, you’re supposed to follow the H pattern and not cut desire paths.
@SaneMartigan@gnu
I was brought up on track driving and old 911s — they demand a certain driving style: rev-matching, always keeping the revs up. That eliminated the need for double clutching.
@SaneMartigan
Impressive — unsynchronized gearboxes are no longer manufactured, in the EU will it soon be nearly impossible to get a driver’s license for a manual transmission.
I need to reallocate 🙏
for a moment i thought this was loss
Also is this for real? Never looked into truck transmissions or even just thought about them in general.
It’s not for trucks it’s for the fast and the furious
The real shift patterns are like this:
They look complicated but it’s not too bad when you get used to the idea. In normal use it’s basically a four speed H pattern with two different ways to increase the number of gears. You have a range selector to give you 8 main gears (you shift 1 through four in low range then flip to high range and move back to 1 position to give 5 through 8) and then you have a splitter that gives every gear a high and low ratio (in order you’d go 1st low -> 1st high -> 2nd low -> 2nd high -> etc). Normally you don’t need to use all the gears so you can skip some of the sequence - particularly when lightly loaded. Lo position is a particularly low ratio, and reverse is as per normal except you can split it to have a somewhat faster or slower reverse gear.
I’ll admit I haven’t driven a full 18 speed but I’ve driven 9 speeds with a range selector and a 10 speed with a splitter and both were easy enough to learn so combining the two doesn’t seem as daunting as it might be to those who haven’t tried either.
I couldn’t get the double clutching timing right, and my instructor was a cunt who got on my nerves the whole day of training. Also because they’re a gated gearbox, you’re supposed to follow the H pattern and not cut desire paths.
@SaneMartigan @gnu
I was brought up on track driving and old 911s — they demand a certain driving style: rev-matching, always keeping the revs up. That eliminated the need for double clutching.
In Australia, you’ve got to show double clutching to pass the non-synchronised driving test.
@SaneMartigan
Impressive — unsynchronized gearboxes are no longer manufactured, in the EU will it soon be nearly impossible to get a driver’s license for a manual transmission.
I need to reallocate 🙏
No, it’s not real.
that kind of makes me disappointed
If it helps the real version is still pretty cool, with basically two transmissions and switches on the shifter
Two separate gearsets in one case