When I do an overhang test, I always have this problem at about 35°. Does anyone have a suggestion what could be causing it?

  • Slicer: Orca
  • Layer height: 0.2mm
  • Infill: 0% (this has improved it a lot, I think the infill was causing bulging)
  • Outer walls: 2
  • Overhang speed: 10 or 20mm/s (both look the same)

  • UnH1ng3d@lemmy.worldOPEnglish
    0·
    7 months ago

    Thanks guys. I will try both and see what works. My layer adhesion is good / parts are strong though.