Is there any downside to leaving something seeding indefinitely? Typically I just leave all my torrents seeding whenever I’m done 24/7 (whenever the VPN is on) but is there any detrimental issues to seeding too much?
It doesn’t bother me I was just curious if there was ever a such thing as too much seeding since I have like 20+ things seeding and maybe one thing downloading.
Speed isn’t an issue since I have gigabit internet.
If your router is the one that your ISP provided, torrenting can affect your internet connection stability by having too many connections active, because most of the time that hardware is trash (at least from my experience).
Most (all?) torrent clients support limiting the number of active connections. This should prevent your router from being overloaded.
In my experience 500 shouldn’t be a problem. On that note, limiting upload bandwidth to something less than the available upload bandwidth is important too.
250 active connections is the limit with my ISP provided router. You can get beyond that, but it causes a lot of instability, and eventually, the network fails and the router reboots.
On another note, I don’t limit my bandwidth at all and I’ve managed to get uploads/downloads of up to 142% the speed which I should get.
So buy your own.
250 connections really is not much. I ran a matrix server for a while and joining a few large rooms (1k+ servers) made the connections reach a few thousand – which made the router slow down/unstable/reboot.
I’ve noticed the same for my upload bandwitdh, with it being 170%-200% of its advertised maximum speed. Sadly the same can’t be said about the download bandwidth. Luckily fiber will be available in a few months.
Hm, interesting. I didn’t bother with a personal router for the longest time (aside from an old Linksys I got because it works with ExpressVPN) because I have fibre optic but I might go out and look for one now.
One related thing to watch out for is the state table size - one of my old cheap routers back in the day showed how full it was and it was hitting 100% a lot and seemed to grind the network to a halt when it did (I was in a house of 5 young people with lots of devices and multiple people torrenting behind a cheapo Netgear running ddwrt). That’s what lead me to switch to high end or x86 based routers. Being able to see the state table stats really helps to know how likely it is to be a problem, it’s so big when using opnsense on an x86 box that I don’t think it ever goes above 1% now.