I like to run qBittorrent on a Linux laptop to try and minimize the risk of Microsoft tracking what I’m doing and to protect my main system from viruses. I’m having an issue with it though. When I go into Advanced and select Network Interface, Proton VPN is not an option there. I only get lo, eno1, wlp4s0, ipv6leakintrf0, and tun0.

How can I get it to bind to the VPN so that I don’t have to worry about it freaking out and sending unencrypted data through qBit?

EDIT: I also tried torrenting Ubuntu and killing the VPN just to test it out. It didn’t stop downloading and uploading when I did that.

  • just_another_person@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    edit-2
    9 months ago

    Hey, bud. If you don’t understand what an interface is, you might be in a bit over your head here. Also, if you’re not running VPN on your entire network at the gateway, running it on different machines like you’re describing isn’t stopping “Microsoft tracking”, whatever that is.

    Just for shitsngiggles, the interface is the network device that is communicating with the Internet in your case. It’s either the wired Ethernet port, the WiFi card, or the VPN tunnel.

    • ShortN0te@lemmy.ml
      link
      fedilink
      English
      arrow-up
      0
      ·
      9 months ago

      Also, if you’re not running VPN on your entire network at the gateway, running it on different machines like you’re describing isn’t stopping “Microsoft tracking”, whatever that is.

      Not quite sure what you are implying but when i do understand OP correctly he only wants to hinder microsoft in tracking his bittorrent usage which this method is sufficient for.

      • just_another_person@lemmy.world
        link
        fedilink
        English
        arrow-up
        0
        ·
        9 months ago

        Why would Microsoft be watching this person use their Linux machine for torrenting exactly? This entire thing reads like a paranoid fantasy.

        If either of you is imaging that Microsoft is watching your public network traffic to catch you downloading your hentai, seek therapy and guidance.

        • ShortN0te@lemmy.ml
          link
          fedilink
          English
          arrow-up
          0
          ·
          9 months ago

          Why would Microsoft be watching this person use their Linux machine for torrenting exactly? This entire thing reads like a paranoid fantasy.

          I have not said that.

          You were the guy who said that running a vpn on a linux machine is not enough to stop Microsoft from tracking you.

          I am saying that a separate machine running Linux does the job preventing Microsoft to track/monitor your torrenting.

    • DreadPotato@sopuli.xyz
      link
      fedilink
      English
      arrow-up
      0
      ·
      edit-2
      9 months ago

      Easiest way is to just point qbit at the “tun0” interface from the network tab in the menu of qbit…point-click-done

  • z00s@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    9 months ago

    I use Mullvad with great success, give that a try. It has advanced configuration options baked in. Has GUI and CLI interfaces, and a dead mans switch for dropouts.

  • BloodSlut@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    9 months ago

    iirc tun0 is what youre looking for. it stands for ‘tunnel’ as in a network tunnel like a vpn.

    been a while though, so you may want to wait for a second confirmation

  • Falcon@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    9 months ago

    Bind tun0 in the settings but what I do is run BitTorrent in a docker container with WireGuard so the vpn doesn’t effect my day to day browsing

  • originalucifer@moist.catsweat.com
    link
    fedilink
    arrow-up
    0
    ·
    9 months ago

    i had all kinds of problems until i removed the vpn from the client. i setup a vpn container, and push all my private traffic over that.

    setup a docker OpenVPN client like gluetun, connect to proton, set your local computer to use the container as gateway/dns

    its not going to be point and clicky, and you should prolly get used to that for advanced stuff.

  • wall_inhabiter@lemdro.id
    link
    fedilink
    English
    arrow-up
    0
    ·
    9 months ago

    How about you use MullVad?

    I’m not being a dick. Proton had enough info on French climate activists to sell them out.

    Extinction Rebellion types may be the most anemic politics I’ve seen in my life, so the idea they’re locking up people attracted to something that lame… it’s like locking me up for piracy. Fuck Proton.

    Also Mullvad server’s are way better for p2p and they don’t try to get more money out of you.

    Are you escaping NATO intelligence with my knowledge here? Fuck no. Look at Mullvaf’s servers list and it’s basically a rundown of every country whose security situation is bad enough that it likely permits the CIA to do what it wants.

    Also your OS is compromised.

  • deezbutts@lemm.ee
    link
    fedilink
    English
    arrow-up
    0
    ·
    9 months ago

    Proton VPN Linux support isn’t as clean ootb. I used a docker image that supported vpns (with transmission) that works well and basically just uses the VPN for torrenting by providing an .ovpn config