• Rentlar@lemmy.ca
    0·
    11 months ago

    Artistic modelling i use Blender but Parametric modelling I used FreeCAD.

    Despite having worked with CAD software, both were a little hard to wrap my head around initially, but I watched like 2 hours of video tutorials each and I figured it out enough for my needs.

  • freshlemon@feddit.de
    0·
    11 months ago

    I’m using freecad exclusively and got everything I need to quickly model something for 3D-Printing.

  • MeowWeHaveAProblem@toast.oooEnglish
    0·
    11 months ago

    Depends on what your using it for? For 3d printers I like FreeCAD. Though it has a bit of an initial learning curve. It has a lot of functionally. SolveSpace was pretty good but I had some trouble with fillets and things. Might have been user errors… I havent used blender much but heard its good for more artistic modeling for games and videos. Not sure if it would work good for 3d parts? Anyone use it for that?

  • Guenther_Amanita@feddit.de
    0·
    11 months ago

    Sadly, I couldn’t fine even one that was at least usable in my experience.

    I model a lot for 3D-printing, and of course tried FreeCAD.
    It had a very steep learning curve and is very unique in its workflow, compared to other CADs.
    I somehow got the hang of it, but it still was very much not usable.
    It crashed every 5 minutes, the UI is very convoluted, and even the simplest tasks take half an hour, compared to the 2 minutes it takes on other software.

    Since Fusion360 doesn’t work on Linux, there’s pretty much only Onshape.
    Apart from being a SaaS-product (“cloud based”), and therefore out of your control, which I strongly dislike, it’s absolutely great UX wise.

    But good news, there are people working on a solution. I will add the name of the project later if I can remember it again.

      • Guenther_Amanita@feddit.de
        0·
        11 months ago

        At this time Fedora. I used both the Flatpak and native package, but both were very prone to crashes.
        I used it for some time too on Windows, same problem. It isn’t a Linux issue, it’s a FreeCAD issue. It’s too convoluted and bloated, while probably not having enough maintainers.

          • Guenther_Amanita@feddit.de
            0·
            11 months ago

            I am already.
            While I don’t plan to use FreeCAD in the near future, I already use Arch in Distrobox on Fedora Atomic. I quite like it, but still mostly refer to Flatpaks first when possible, since they have a lot of users and are better sandboxed.

    • PlexSheep@feddit.de
      0·
      11 months ago

      I personally never had a problem with Free cad. It’s the only cad software I ever used, so I can’t compare it to others but it just worked after I learned some basics.

      • lloram239@feddit.de
        0·
        11 months ago

        FreeCAD requires a lot more clicks. Simple example: You want to extrude part of a sketch. In Fusion360 you select the part, hit extrude, done. In FreeCAD you can’t extrude a part of a sketch, only whole sketches, so you have to make a new sketch, important the geometry of your previous sketch, repaint over the imported geometry to make it an actually sketch and now you are allowed to extrude it. When you have an extrusion that would result in multiple bodies, you have to redo this produce for each and every body, since FreeCAD extrusions are only allowed to produce one body. This can easily turn a 5sec operation into a 10min operation.

        On top of that you have the topological naming problem that forces you do basically remoddel your whole thing from scratch if you want to change anything in the early build steps.

        There are numerous ways to ease the pain (MasterSketch, Datum planes, ShapeBinder), but they all require a lot of discipline and planing ahead. You can’t just YOLO your models in FreeCAD the way you can in Fusion360.

        On the plus side, the discipline FreeCAD forces on you can result in cleaner results. In Fusion360 it’s quite easy to model yourself in a corner were everything is underconstrained and will just exploded if you touch anything. Fusion360 will let you get away with a lot until it is to late. FreeCAD will go “I can’t do that, Dave” a lot sooner and force you to clean up.

        All that complaining aside, FreeCAD is my CAD tool of choice. I am never going to touch Fusion360 with its ever more restrictive licensing scheme ever again.

    • EddoWagt@feddit.nl
      0·
      11 months ago

      But good news, there are people working on a solution. I will add the name of the project later if I can remember it again.

      Im definitely interested as well, we got plasticity I suppose, but that doesn’t have a timeline and is missing a lot of more advanced features

  • ByroTriz@lemmy.ml
    0·
    11 months ago

    One that hasn’t been named yet is SolveSpace. There is also CAD sketcher, a free CAD add-on for Blender

  • mranderson17@infosec.pub
    0·
    11 months ago

    I use FreeCAD and Assembly3 for everything and have for many years now. I sometimes use realthunder’s fork of FreeCAD but right now it’s quite a bit behind upstream and there are some cool new features in sketcher so I use upstream for those.

    Some people get confused about workflow in FreeCAD because there are so many options and every youtube video has different opinions or tries to feature a particular workbench like curves or something. My opinion… Pretty much your workflow starting out should be to ignore everything else and use part design and sketches, it’s the simplest way:

    1. enable autosave with a short interval, like 2min
    2. Switch to part design workbench
    3. create body
    4. create sketches as the base of the features of your part attached to the xy, xz, yz planes, offset them to create a “wire frame” that resembles your project a. Your sketches should be fully constrained b. Your sketches should have as little geometry in them as possible, if you need more complex stuff make more sketches c. Your sketches should have closed wires, you can’t pad something that doesn’t create a face.
    5. use pad, pocket, revolution, loft, and hole operations on those sketches to form a 3d solid
    6. if you need to create additional sketches which import geometry from the previous operations (using the external geometry tool), import SKETCH geometry from the previous ops, not edges of solids, whenever possible. Hide your solid, unhide your sketch, select that with the external geometry tool. a. Use sketch on face sparingly.
    7. Do fillets and chamfers last, if you need to change something, delete them and recreate them once you’ve made your changes.

    To make multiple parts make multiple bodies with the same workflow as above.

    Once you get pretty good at making static parts with constrained geometry, holes, threads (with the hole function), etc, which you can do with only the stuff above, then you can branch out into other workbenches like assemblies or curves, but all of those things build on the concepts above, so it’s easy to get overwhelmed if you try to do it all right from the start. Learning how to recover from a mistake is just part of CAD in general, though I admit that it’s a bit more effort to find what’s wrong in FC vs commercial platforms, but we aren’t here, on lemmy, in a linux community, to use commercial platforms.

    AFAIK that’s pretty much the same workflow as F360 uses for single-solid parts though things have different names. pad=extrude for example.

    It’s obviously far from perfect but in my opinion it’s the best solution that runs natively on Linux and is actually open source. Also assembly3 uses solvespace as it’s backend solver so if you make assemblies using that you are kindof using solvespace too.

    Also, I hear/read a lot of complaining about instability but I’ve honestly never had a crash that wasn’t on an experimental branch like RT or the edge release of upstream. However step 0 above should help if you’re worried about that.

  • mnemonicmonkeys@sh.itjust.worksEnglish
    0·
    11 months ago

    Honestly? Not much. FreeCAD is an abomination, so I’m keeping ine of my computers on Windows so that I can still use Fusion360

    • glasgitarrewelt@feddit.de
      0·
      11 months ago

      FreeCAD isn’t an abomination. Maybe it feels like one for you, but that isn’t the truth for everyone.

      I for one enjoy it very much. My workflow for building carports with the arch and part workbench feels quite solid, no crashes and I am fast enough to make profit.