Small point of grammar: Floating “over” controlled airspace means you are still outside of it. Airspace is 3 dimensional so in addition to having horizontal boundaries, it also has vertical boundaries. Class C airspace for example, which you find around semi-busy airports like Raleigh-Durham International, looks kind of like a quarter stacked on top of a penny, except the stack is 4000 feet tall and 10 miles in diameter. You remain outside of the Class C airspace if you fly directly below the outer “ring.” Or if you fly directly above it. I’ve done both, though I usually make a habit of calling up the approach controller and requesting flight following so that they can talk to me if they need to (“me” being a licensed pilot flying Skyhawks or smaller).
If you are going to fly an ultralight aircraft, you should seek out and receive training about the national airspace system, learn how to read a sectional chart, read things like Part 91, etc. I would advise carrying an aviation COM radio and monitoring local CTAF frequencies.
If flying something like a free balloon, you should know the prevailing conditions before takeoff. If the wind is blowing in the direction of a no no place, just don’t launch. Stay on the ground until conditions for safe and legal flight exist.
You presume a scenario where you make this realization while you are in the air. In practice, you made this realization hours earlier, and adjusted your flight plan to avoid that problem. You selected a launch site that avoids putting you in that situation.
If I do find myself encroaching on controlled airspace, I could declare an emergency, inform the controller where I am so they can vector traffic away from me, and do what I need to do to get down safely. At the very least, I would expect to do a lot of paperwork, and possibly have my license suspended.
With Class B and C airspace, the boundary is altitude dependent. The outer ring of Class C is 10 miles from the airport. I can fly between 5 and 10 miles of Akron Canton Airport, I just can’t climb above 2500’ MSL while in that area. I generally plan my flights to stay outside 10 miles, with the understanding that I can just stay below their airspace if I happen to get too close.
Descend and land. You’d have done that long before “starting to enter” restricted air space. Otherwise enjoy your fine and potentially losing your license once the FAA finds out.
It’s like not you can accidentally enter restricted air space. You know you’re going to be entering the airspace long before you get there so there is plenty of time to take action.
That’s true, but “not knowing” is a far more egregious violation. Licensed or not, a pilot is expected to know where they are allowed to fly, and where they actually are. “I didn’t know it was restricted” is the aviation equivalent of driving the wrong way on the freeway.
Sectional Charts are freely available from the FAA in digital form, and cheaply (<$10) available on paper. They have a legend that shows how controlled airspace, congested areas, and airports are depicted, along with more than enough landmarks for orientation. Every pilot, licensed or not, must know where they can and cannot fly their aircraft.
Small airports aren’t really an issue tho. FAA won’t come after you for that. But you should always know where you are, where the restricted air spaces are, with a plan to avoid them. If not you’re fucking up as a captain.
Restricted airspace’s are there for a reason. It’s for safety and not paying attention to them has consequences.
I’m an unlicensed ultralight pilot and I know where I can and cannot fly. Every ultralight pilot I know also knows where to fly (and how to read a sectional).
There are sectional charts on the ground, available to the general public, not just licensed pilots. If you’re going to fly, you are expected to know the relevant airspace long before you fly in it.
So. What do I do if I start floating over controlled airspace? I can’t make it go any other way.
Small point of grammar: Floating “over” controlled airspace means you are still outside of it. Airspace is 3 dimensional so in addition to having horizontal boundaries, it also has vertical boundaries. Class C airspace for example, which you find around semi-busy airports like Raleigh-Durham International, looks kind of like a quarter stacked on top of a penny, except the stack is 4000 feet tall and 10 miles in diameter. You remain outside of the Class C airspace if you fly directly below the outer “ring.” Or if you fly directly above it. I’ve done both, though I usually make a habit of calling up the approach controller and requesting flight following so that they can talk to me if they need to (“me” being a licensed pilot flying Skyhawks or smaller).
If you are going to fly an ultralight aircraft, you should seek out and receive training about the national airspace system, learn how to read a sectional chart, read things like Part 91, etc. I would advise carrying an aviation COM radio and monitoring local CTAF frequencies.
If flying something like a free balloon, you should know the prevailing conditions before takeoff. If the wind is blowing in the direction of a no no place, just don’t launch. Stay on the ground until conditions for safe and legal flight exist.
Flight planning.
You presume a scenario where you make this realization while you are in the air. In practice, you made this realization hours earlier, and adjusted your flight plan to avoid that problem. You selected a launch site that avoids putting you in that situation.
If I do find myself encroaching on controlled airspace, I could declare an emergency, inform the controller where I am so they can vector traffic away from me, and do what I need to do to get down safely. At the very least, I would expect to do a lot of paperwork, and possibly have my license suspended.
With Class B and C airspace, the boundary is altitude dependent. The outer ring of Class C is 10 miles from the airport. I can fly between 5 and 10 miles of Akron Canton Airport, I just can’t climb above 2500’ MSL while in that area. I generally plan my flights to stay outside 10 miles, with the understanding that I can just stay below their airspace if I happen to get too close.
Descend and land. You’d have done that long before “starting to enter” restricted air space. Otherwise enjoy your fine and potentially losing your license once the FAA finds out.
It’s like not you can accidentally enter restricted air space. You know you’re going to be entering the airspace long before you get there so there is plenty of time to take action.
Actually, a lot of people don’t realize they’re in restricted airspece. There’s more small airports than people realize.
That’s true, but “not knowing” is a far more egregious violation. Licensed or not, a pilot is expected to know where they are allowed to fly, and where they actually are. “I didn’t know it was restricted” is the aviation equivalent of driving the wrong way on the freeway.
Sectional Charts are freely available from the FAA in digital form, and cheaply (<$10) available on paper. They have a legend that shows how controlled airspace, congested areas, and airports are depicted, along with more than enough landmarks for orientation. Every pilot, licensed or not, must know where they can and cannot fly their aircraft.
Small airports aren’t really an issue tho. FAA won’t come after you for that. But you should always know where you are, where the restricted air spaces are, with a plan to avoid them. If not you’re fucking up as a captain.
Restricted airspace’s are there for a reason. It’s for safety and not paying attention to them has consequences.
Yes, but unlicensed people won’t know where they are. It’s not like there’s signs in the sky.
If there are, landing might not be the best option! Best to fly over the apocalypse 👍
I made this for you: https://i.imgur.com/gS8IMb2.jpeg
I’m an unlicensed ultralight pilot and I know where I can and cannot fly. Every ultralight pilot I know also knows where to fly (and how to read a sectional).
There are sectional charts on the ground, available to the general public, not just licensed pilots. If you’re going to fly, you are expected to know the relevant airspace long before you fly in it.