Give us the cheat codes to your industry/place of work!
From when I worked in IT:
-In your ticket, do not give a vague description and a time you want the problem fixed and then expect anything to get fixed. Often times we very much need to work with you directly to understand your problem thoroughly to investigate and fix it thoroughly.
-If you have some weird problem, it might be just as weird to us when we first look at it. We are not omniscient. What we are good at is researching possible fixes, applying them, and measuring the effect they have in actually solving your problem.
-If we didn’t install it, don’t expect we know anything about it. You might really like to install and use Fusion 360 over AutoCAD or something, but that doesn’t mean I know where Fusion 360 is storing its configurations, or that I have a phone number to call to get support from that company as a vendor, or that I have ever troubleshot this application.
-If you’re really nice to us, we might be able to offer you suggestions for problems on personal computers, but sorry, we cant usually touch it, especially if we are outsourced IT. The moment we touch your personal computer it opens us to a shitload of liabilities and it could lose me my job.
-We understand very much that typically the only time you’re talking to us is when you’re mad because some shit is preventing you from working, but we don’t want that either so don’t be mad at us about it, we would prefer you never had to put in a ticket for anything except configuration change requests.
-Pay attention to our recommendations. If we say you have to have your laptop on at a certain time of day weekly for updates, we aren’t just asking for our benefit, we’re asking this because if you ignore it, eventually when you power on your laptop, windows is going to force all those updates to push at once and suddenly you’ll be without your computer when you’re supposed to be doing an important presentation because its going to take 4 hours for a years worth of updates to apply. We have little control over this.
I’m in the museum sector.
Never pick something up to move it until you’ve seen the place where you’re moving the thing and it’s clear of junk.
It’s safer to make two trips instead of one. It’s safer to make three trips instead of two.
The best thing you can do for something old that looks like it’s slowly falling apart is usually to leave it alone.
A lot of people who come into the museum do that, do they?
Tax Accountant in U.S.
You don’t need a CPA (and I say this AS a CPA). Don’t get me wrong, if a CPA’s primary experience is in tax, they will do just fine. But you don’t NEED one. Even if your tax situation is complex. An Enrolled Agent (or EA) goes through a rigorous testing process and is run by the IRS. A CPA also goes through a rigorous testing process but it’s 4 parts and only one is tax. An EA exam is 3 parts and it’s ALL tax. So if your tax situation IS complex I recommend one or the other…but an EA is highly qualified and often times less expensive.
All that said… neither is necessary but make sure your tax preparer is at least certified and either is required to take annual continuing education or does so regardless. Tax laws change all the time. EAs and CPAs have CPE requirements…so if ur preparer isn’t one of those, make sure they’re still learning the new stuff. All a person needs to file another persons tax return is a number called a PTIN and literally anyone can pay a fee and get one.
And if you can handle filing yourself (which the vast majority can easily do, and I would rather they do so because why throw your money away if you don’t have to) the IRS is expanding their guided free file program for 2024 to the whole United States (it was in limited testing for 2023) and many states are expected to sign on so you can get fed and state taxes filed for free. IRS.gov has more info on all that.
…what’s a CPA?
Certified public accountant
Nursing/Psychiatry: here’s what to pack for your friend in the psych hospital!
- T-shirts, logos fine, avoid anything explicit/vulgar
- stretchy pants, no drawstring or that can have the drawstring removed and don’t need a belt
- a sweater without a hood or zipper
- socks
- slide on shoes (no places)
- a puzzle book with more than one type of puzzle
- a book in a genre they like
- a coloring book
- a notebook to write in
- crayons
- a stress ball
- one of those silicone bubble popper toys
- snacks/food that are still sealed or that have one of those doordasher stickers fast food places use sometimes.
DON’T bring:
- anything with long strings or cords
- anything sharp or pointy or made of glass or ceramic
- plastic bags
- bedding/pillows
- anything valuable or sentimental other than maybe a smartphone, and ID
Software Engineer:
Make a junk email for junk signups and accounts, if you can. Don’t accept the cookies. If the product you’re using is free, the information you enter is what’s being sold to someone else.
Ctrl+Shift+Tab reopens the tab you just accidentally closed.
I just started using Proton mail’s aliases for that and love it. If I see a bunch of spam coming to one particular alias, I’ll just delete it and make a new one. So far, it’s been great
If the product you’re using is free, the information you enter is what’s being sold to someone else.
Even paid services can and usually will sell your information, so just assume that everything that you enter is considered public information from that moment on
Looking at you, Adobe
Isnt the reopen tab CTRL SHIFT T?
My god, I hadn’t even noticed that autocorrected to “Tab”. Fixed it, thanks for the call out.
Adding onto this, either have a temp mail addon, or have one such site bookmarked on your browser.
Corporate IT: I see nearly everything you do on your computer. I can see exactly how long what application is open. If I ask you to restart your computer, you don’t, and you somehow get me in front of it, restarting it better not fix it or your next ticket is gonna be low priority no matter what. If you want in with IT, always open a ticket and include as much info as you can clearly convey. Snacks and bribes won’t always work with those of us who are very antisocial.
Snacks and bribes won’t always work with those of us who are very antisocial.
Always ask the person you are trying to bribe what they like to be bribed with.
I’ve dealt with my share of PC issues and apart from digging in and writing scripts, I’m an advanced end user. One time le tired IT guy needed to remote in for some issue I didn’t have appropriate access to deal with. He seemed rather startled when I opened notepad and said “Hi!”
I also swear I began to get more difficult to recognize fake phishing attempts shortly after.
Dave, if you’re reading this you never caught me with one! Gotta try harder!
Can you hijack the camera and see us too?
Yes, of course. Though your camera light would alert you of the usage, unless of course, your IT guy ordered a camera that can deactivate the light via software (or simply opened the camera and yanked the light)
No and if I found a way I would file a report against any other IT agent who did. That’s invasion of privacy IMO. Microsoft can tho, remember the Kinect?
or your next ticket is gonna be low priority no matter what.
That’s childish and won’t ever cause a change in their behavior.
Bonus points if they show management the ticket that’s stalling a project from progressing and has been sitting on your desk for 2 weeks.I will prioritize nicer clients (assuming the issue is equal as fast to solve) if they are more pleasent to work with.
You say that like it’s the one “high priority” ticket that the one big project is waiting on. In a sea of backlogged high priority issues attached to critical projects, being an asshat means that yours will be at the bottom of the 100 other super-important, my job-is-special tickets.
Stalling a ticket here means a day, not two weeks. I have 72 hours to respond at a maximum before I get penalized. We are worked so fast here the skin flies off your bones.
HVAC: Don’t shut your air vents to give you better heating or cooling in certain rooms/floors. You’re adding pressure to your system and reducing its life. If it’s AC then you’re turning it into a freezer. That’s why doing so freezes the coil, not enough air flow to move the cold air out and keep it from freezing. For heat it literally can overheat the control board frying it since the blower also helps cool the electronics. If you have hot and/or cold rooms (this is normal per floors) ask about adding dampers. Most of the time it’s not possible without major drywall rework and it isn’t cheap. Your builder sucks (basically). A lot of companies won’t quote the work because it can’t be guaranteed. You’re essentially stuck with the crappy design the builder got approved. One potential is minisplits. Again, not cheap per room and not pretty but they will fix your issue.
Rethinking so many life choices.
HVAC: mini splits
black mold forms and causes breathing problems. Clean aircons (air conditioner) every 6 months - 1 year.
If water is dripping from the outside unit, your aircon is lacking gas. Making it into a giant fan.
A mini-split is chosen to meet the needs for one room. Some folks, and can’t be convinced otherwise, think an aircon can cover the entire universe. And to prove it, they leave all the doors open.
This is proof we live in the matrix. It’s completely unsolvable issue without self closing doors
If water is dripping from the outside unit, your aircon is lacking gas. Making it into a giant fan.
Water dripping means the cold side coil is cold enough to condense water out of the air. In what way does that suggest it is not working?
Normally the cold is carried by the gas to your room. The less gas you have, the less efficient this transfer is, and the colder your outside unit will be.
When the cold side is for inside air, I think you’ll find that the water it condenses from the inside air is piped outside
Some, especially newer units are designed to evaporate most of the condensate (water). That being said many will still drip water depending on the humidity (high) outside and also inside. And it be perfectly normal.
Are you in the industry, 'cause that doesn’t ring true to me. Why would you spend the energy to evaporate water when it’s so cheap and easy to dump the water on the petunia patch?
Refrigerators collect waste water in a tray on the assumption that the indoor climate will be dry enough for the water to ambient evaporate
Air con is incredibly popular in the tropics where it’s dropping 100% RH to 30% and making a lot of water
Yes 15 years, because it saves energy by making the system more efficient.
Window units design the fan to throw the water onto the condenser this evaporates the water AND cools the freon in the condenser coil. Commercial stand up refrigerators often run the condenser line through the condensate pan for the same reason.
They don’t “spend” energy doing it, they save it.
Split units and traditional A/C will just drain or pump the water somewhere.
Thanks, that is pretty neat
Also, don’t use evaporated water for your flowers; there are no minerals in pure water and for them it’s like eating wallpaper paste
I looked up dampers, and I’m confused about how they are functionally different than closing/opening the vent? I’m sure I’m not understanding though. Is it just about the location?
They don’t operate differently. Also he is assuming your ducts are designed and balanced properly to begin with. Most in residential homes aren’t.
While shutting off a lot of vents can cause problems. Shutting off an unused room isn’t going to hurt anything. Or partially closing a vent because a room gets too warm/cold. Because like I said they do fuck to balance systems in residential homes.
Proper dampers redirect airflow, not eliminate it. Again, see, your house builder sucks.
Thanks. I was thinking of shutting the vents of one room in the house that is empty and unused, but I figured just keeping the door closed would probably be better, right?
I agree that shutting 1 vent isn’t going to kill your system. However, that one room isn’t insulated on interior walls. Best to leave it alone for overall comfort. You aren’t saving $ closing the vent. The system is going to run until the thermostat is satisfied no matter what.
Also, best thing for the entire building is to run the fan constantly (I forgot to mention this in the original). Balances the building much better than just the entire system kicking on and off every 15 min or so.
Shut it off, it won’t hurt anything. It’s only an issue if you’re shutting off a lot of vents. Now how much good it’ll do energy saving wise, depends on where the room is in the house and how old your house is. Newer houses with better insulation will see much less improvement.
Won’t it potentially cause humidity issues? The room does not get direct sunlight (faces south). It’s a new house with pretty good insulation (as far as I’ve experienced so far).
Without being there, I couldn’t say for sure., but I doubt it Personally, I would just use common sense. Shut it off and and just check the room a couple times over the next week or two.
Can’t imagine this is relevant to a lot of folks here, but corporate event audio visual:
Don’t use the audio visual company that’s “in house” at a hotel. They’re paying nearly 50% commission for the privilege of being there and getting business shunted to them, so only half of what you pay is going to goods or services.
That said, make sure your hotel contract leaves you free to bring in an outside vendor without having to pay too many fees. Cross out any lines related to things like “load in/out liaison,” paying for polytak floor covering, or paying some percentage of your outside AV bill to the in house company. It might help to include a proactive clause like “client will not be charged any fees for bringing in our own audio visual partner”. Include a line that you won’t be required to pay surcharges like “event technical support” which is just a “we’re charging you a fee” fee.
You will still have to pay the in-house AV vendor for any power, internet and rigging. For internet, confirm what your rate will be before signing the contract. We see a lot of cases where they’ll say “the meeting room wifi is discounted (free) if you use us for AV too, but if you don’t it’s $20k” (actual number, and could be even higher) Once you sign without negotiating they’ve got you over a barrel.
If you already have a contract you may be able to mitigate these issues by leaning on your hotel salesperson. Trying to negotiate with the in house AV rep will usually be ineffective (sometimes they’re cool). The hotel is the in-house AV vendor’s number one customer, so if the hotel says they need to do something, they’ll do it. Usually leaning on your hotel salesperson after signing a contract only works if you have some leverage like potential for future business.
Yeah, the main company for most hotels literally got the exclusive contract by bribing the hell out of all of the hotel owners/executives. And they were so notoriously shitty that they bought a smaller company a few years ago, just so they could change their name to the smaller company’s name and attempt to sidestep lots of the bad reputation.
And to add to that an outside vendor will almost always provide a better result because they actually have to work for their jobs, rather than their jobs being given to them. They also have to work in more venues so they are more flexible and able to customize your AV to meet your specific needs. Many of these in house crews have only a couple setups that they will do for a room and if your setup doesn’t fit that preset, tough.
The only downside is, because their shop is not on site, last minute add ons are difficult if not impossible to do. So make sure you account for everything that is happening and communicate it with your AV company so they can spares for any last minute add ons you may want.
Good points! I know my last couple jobs have had “partner” companies that were similar to us in each major metropolitan area. So if we had a pop up request beyond the backup gear we packed, we could still get it from a warehouse less than an hour away. (And there’s always the wholesale rental houses like Rentex)
IT
Scripting menial tasks isn’t that hard. You can learn basic shit pretty easy. It’s a nice little dopamine hit when you get even something small that works. Make your computer work for you, not against you.
Also, Excel. If you have to use Excel at all in your job, learn the basics of formulas, formatting, and tables. It will take you maybe a day, and your excel shit will look 100x nicer, and work 100x better than whatever the fuck you are doing now.
I found out last year there’s an entire Microsoft Excel World Championship and my mind was blown.
Here is an alternative Piped link(s):
https://piped.video/QwNoFOUiSiE
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source; check me out at GitHub.
Tech, specifically AI automation. My LPT is that most services are just using GPT4 in some capacity. Automated workflows are not plug and play, credentials expire, variables change, limits are exceeded, etc. Rather than pay a random company to build and maintain something for you, you can save a shit ton by just hiring someone in-house who knows Zapier or Make and having them build the workflow you need.
So I typed out a long reply with helpful tips and everything but Lemmy broke and I couldn’t send that, and I really can’t be arsed again, this is already too much effort.
Massage/Wellness: your posture sucks and your back hurts all the time because you have a flabby gut and no ass. Get to exercising.
I work at a gas station—take note of your damn pump number.
Like everyone else, I get distracted and forget to do this. Then I look out at my car while standing at the register. Naturally, the numbers are not visible from this location…
Indeed.
Can you just check on the camera. Yeah, the blue car. No not that one, the other one.
“It’s the one at the end.”
Turns out it’s Pump #2, not Pump #1…
I’m a truck driver.
- You are far safer behind me than in front of me. It can take me over two US football fields (200 yards or roughly 180 meters) to come to a full stop and it takes more distance if my trailer is empty. The average car can stop in half that distance. Most cars turn into tin cans when hit by a rig at 25 mph.
- If you see a number of trucks all moving into the same lane, might consider getting in the same lane, behind us. Odds are pretty good we either saw something in the lane ahead or we heard about something over the CB.
- I can see you playing on your phone while driving. Cops in some states have been known to hitch rides with truck drivers in order to catch distracted drivers.
- Learn zipper merging!
ZIPPER MERGE, PEOPLE!!
Additional hot take, merge near the end of the merge lane rather than slowly try to force yourself into traffic further back. Keep it moving and respect the zipper merge at the end.
And when you get to the end, start looking for the opening and merge, don’t slow down or gun it and try to get ahead of five more cars.
🙏
Yeah it looks just like that but with cars
It takes more distance to stop with an empty trailer? I would have thought the opposite. How come?
NM, saw your reply below. Thanks.
it takes more distance if my trailer is empty
This seems counterintuitive. I would love to hear why.
Most of a tractor-trailer’s stopping power is split between the trailer brakes and the tractor’s drive tandems. If there is not enough weight on those axles, the tires can’t grip the pavement properly. If I apply too much power to the brakes the wheels can start bouncing or just lock up and start skidding if the ABS system is acting up.
Most tractor-trailers you see on the road in the US are designed to weigh 60,000 to 80,000 lbs (~ 27,000 - 36,000 kg). For comparison, a Honda Civic weighs roughly 3,000 lbs (1360 kg). Every system on the truck is designed around moving that amount of mass safely. With an empty dry van trailer your looking at closer to 30,000 lbs (~ 13,000 kg). Makes a difference in performance. Ride is rougher, takes longer to stop.
Thank you. That’s fascinating.
Sounds like you’re talking about icy or wet roads. I’ve never had a trailer do that on dry pavement and I can definitely stop faster emptying than full.
In the age of computer-controlled ABS and brake assistance systems, that just sounds like poor programming.
There’s no reason why the computer shouldn’t be able to take current weight into account and deliver more braking power to the tractor when the trailer is empty.Is ABS a thing with air brakes?
- https://www.bts.gov/content/average-age-automobiles-and-trucks-operation-united-states
- https://www.bendix.com/en/products/vehicle-dynamics/
Some probably do, tech has advanced quite a bit since I started driving in 2008, but the newer tech tends not to be installed widely when it first comes out due to how unreliable tech becomes under the working conditions that are normal in the trucking industry. Fleet owners want their equipment on the road making money, not in the shop costing money, so they tend to wait till a tech proves itself to be reliable. Plus upgrades costs money, so they tend not to happen till a unit is replaced with a newer model, which can take a while.
Most large companies in the US have an experimental fleet where they try out new tech first, before they roll it out to the rest of their fleets. They are looking for cost effectiveness, reliability and driver response. The smaller owner operators, which make up the bulk of the trucking industry, tend to follow (slowly) after them. And as old as the trucks are, the trailers are often even older. While most trailers in my company’s fleet are less than 3 years old right now, the oldest trailer (now mostly used for hauling pallets back to Chep) was built in 1992 according to it’s data plate. If it’s ABS system is newer then 2008, when it was last active in the fleet I’m a monkey’s uncle, and I’d pay long odds it’s still the original system from 92.
Great insight, thanks!
I would imagine it has to do with traction and ability to apply braking forces without skidding the wheels.
Even in a pickup truck, it’s easy to skid the rear wheels (antilock brakes aside) with the bed empty because the brakes can easily overcome the traction of the tires. This is why pickups have height sensing proportioning valves.
That makes sense.
I have driven many thousands of miles and my favorite place on the road is 100 yards behind a big rig that’s heading my way. i can zone out and safely follow and people rarely want the spot between you and the truck for long so you can just go hours keeping that square centered.
It’s even better at night when the trucks lights give you a nice preview of exactly how curvy the road is.
Eventually big guy takes an exit and i always send a grateful salute cuz following a big rig 100 yards back is better than cruise control imo.
Plus your probably save on gas too.
Report dev/data analysis/data engineering: if you think data or a report is wrong tell us exactly what information is wrong, exactly what report/code you ran, exactly what filters you selected, and exactly what you are using to compare that information. Second thing: no we can’t just ”make the data different", we pull the data in the database. If it is “wrong” it is upstream of us, we need to find the root issue.
I’m a philosopher, nothing matters, so stop worrying about it and live your life the way you want to live it.
The real question is, do you have Nietzsche’s mustache too?
You put the peeps in the chili pot and make it taste…bad.
I work in information security.
Don’t use biometrics to secure your devices. Biometrics are a convenience feature to make it easiest to access your device. Biometrics are NOT security. You can be compelled to unlock your device by having it pointed at your face or your finger forced onto the reader. Don’t do it.
Use 2FA/MFA everywhere you can. If it’s an option, turn it on.
Use a password manager that generates strong passwords and use a different password for every service you use.
Update, update, update. Allow your devices, OSes, and software/applications to update automatically.
Talk to your parents about safe surfing. Tell them that their bank won’t send them an email or text asking them to send personal information. Set a password with your family to identify them if they are in trouble and need help. Tell parents and grandparent not to send you bail money to get you out of jail in Morocco.
Teach your kids that everything they post on the internet is public and permanent. Teach them that if they do something that they think will get them in trouble and sometimes it’s blackmailing them that is better to tell you and ask for help than to give in to the blackmailers.
Regarding biometrics, I’ve felt that one advantage is that if I’m in a public space, I don’t have to worry about someone watching me enter my password over my shoulder. If I got into a situation where someone is physically overpowering me to get my finger onto my device against my will, I’m probably going to give them whatever password they want so I don’t get a beat down.
That’s a threat and risk assessment. You’ve decided you’re willing to accept the risk of anyone being able to unlock your phone to avoid the threat that someone will strong arm you. For me, I’m not really worried about someone in the street strong among me. I’m more worried about a state actor, border guard, police officer, etc demanding that I unlock my phone. They can physically compel you to unlock your phone by pointing it at your face or putting you finger on the pad but they cannot compel you to give them your password.
I’m probably preaching to the choir, but for those who don’t know, at least on an iPhone and I’m sure android has something similar, if you foresee the situation coming you can just hold the sleep/wake button for a few seconds (even while your phone is in your pocket) and it will require the passcode and not allow biometrics.
For android it’s power+volume up to bring up the power options menu (shutdown, restart, etc) and there is a “lock down” option that disables biometric unlock.
Wish I could do it with one hand, but good to know it’s there.
I definitely see your perspective, but mostly wanted to make sure I wasn’t overlooking some obvious downside in my risk assessment.
I figure my chances are low that I will get into the situation where an authority demands access to my phone but I also don’t have the opportunity to lock out biometrics. Like if I get pulled over I just hold power and volume up buttons for three seconds and biometrics is off. That said, it certainly doesn’t eliminate my risk completely, and I wouldn’t consider anyone crazy for just opting out completely.
The other problem with biometrics is you can’t change them. With the OPM breach a few years ago they lost 5.6 million finger prints. Those finger prints are now useless since they are in the wild and can’t be changed. Not a problem for your average phone user but in my world that’s a really big deal. In my world biometrics are a convenience and convenience is bad for security.
As long as you’ve considered and accepted the risks you’re good.
Time to start using the middle finger, until the next data breach. Then the ring finger.
A verbal secret passphrase to identify yourself to your family would be pretty smart.
Yup. Also having an agreement that an X from any family member means they are uncomfortable or in trouble and you should call them in one minute, tell them that there is an emergency, and you need to pick them up right now. Get them safe and don’t ask questions unless they want to talk.
Allowing apps to update automatically often means that advertising and feature removal or nerfing, etc., can happen. Checking manually has saved me a lot of grief.
That’s my expert opinion. Take it or leave it. It’s your device.
In this day and age where updating an app means losing half the functionality, no thanks. Would love a way around that though!
You’re exposing yourself to unpatched vulnerabilities for convenience instead of updating or deleting the app. If you lose half the functionality because of an update it’s time to find a new app in my books.
If only that were an option…
I’ve heard this sentiment for almost 20 years. “The app works fine, why update, it only breaks things.”
Then they blame me when it starts being incompatible with the current OS or some other application. Even if the only fix is to update they still resist or refuse outright.
I finally let my phone do some app updates the other week, my banking app now displays full screen ads for their credit cards, conveniently right as you go to click the transfer button.
I don’t update shit anymore. I update my OS and apps on my desktop, but my phone is now being actively neglected in regards to app updates. Every single app update breaks something, removes a feature, or brings ads into the picture.