You must log in or register to comment.
Can someone give me a brief intro to orca slicer? Who is it made by and what’s it’s quirk?
For example prusa slicer, made by prusa, prioritizes user interface and has powerful almost modeling features (text, cutting etc)
It’s worth giving a try
You’re four forks deep now Slic3r to Prusa Slicer to Bamboo’s slicer to Orca. It also borrowed a lot of ideas from Super Slicer. Since it’s open source, and has been gaining some momentum, it seems to have a decent amount of contributors
Why Orca?
- all the features you know and love from things up the tree
- a revamped UI
- built in tuning tests (temp tower, extrusion multiplier, volumetric flow, pressure advance, etc)
- great Klipper integration if that’s your jam
Orca slicer is a fork of Prusaslicer
And it’s fantastic!
Edit: its actually a fork of bamboo slicer which is a fork of prusa slicer
Fork of a fork of a fork.
The beauty of open source software
What are the advantages over Prusa?
Ease of use or features? Both?
I’d say all of the above. Its integration with Kipper is also very good
I used to slicer hop around, then i discovered orca. Just the best imho
Edit: its an open source fork of bamboo slicer
And Bambu Studio is a fork of PrusaSlicer
Which is a fork of Slic3r
The UI of Prusa slicer is hot garbage though. I started with prusa slicer and moved to orca after a few months. Orca is a much nicer experience, and the built-in test-models (temp towers etc.) are nice.
The UI of Prusa slicer is hot garbage though.
I give orca/bambu the edge for “prettier on screenshots”, but in practice, I don’t find their UI paradigm to be more efficient nor convenient.
The UI of Prusa slicer is hot garbage though.
I’m comparing cura and prusa, so prusa wins by a lot. What are you comparing prusa to? Orca?
Yes
Any plans to add belt printer support?
Does it work on recent Linux releases yet?
What issues have you had? Ive been using orca for about a year without any issues all. I’m running Mint, both stable and beta branch have been without issues for me.
Appimage doesn’t start because it relies on a system package that does exist anymore, dialogs with grey text on grey backgrounds in dark mode, stl repair not included…
Flatpak is in the works but honestly and hope that helps bit I get better prints out of prusaslicer for some reason so not holding my breath or anything.
Weird, I’m using the appimage and it starts just fine…what distro are you using?
Ubuntu but it also affects fedora https://github.com/SoftFever/OrcaSlicer/issues/185
The image just isn’t being built correctly which is more a problem with appimages but the fact it’s still broken… Linux is clearly a neglected platform for them.
All the problems I listed have bug reports just nothings happening to fix them.
I run it on Nobara and Fedora, and I only have occasional graphic glitches with the windows
That’s good. I assume you’ve got the old libwebkit installed somehow. There are a dozen reports around this though so it’s a pretty real problem. https://github.com/SoftFever/OrcaSlicer/issues?q=libwebkit2gtk-4.0.so.37
Well I have chromium installed, I use it to segregate Google services to a dedicated browser
